Bonjour
J'ai un NAS Synology DS214play branché sur un onduleur Eaton.
J'ai branché l'usb de l'onduleur sur le NAS pour gérer l’arrêt si
l'onduleur passe sur batterie, etc
seulement j'aimerais envoyer les états de l'onduleur à d'autres machines
sur lesquelles je n'ai pas forcement UPS (box domotique, etc)
je me demandais si on pouvait surcharger le programme lancé par upssched
à la ligne CMDSCRIPT /usr/syno/bin/synoups
j'ai joint le synoups
pourrait-on rajouter des lignes du genre : /chemin binaire du php/php
/chemin des scripts php/actionups.php "Onduleur" "Perte du Secteur"
(exemple suite vu ce site
http://adub115.free.fr/index.php?post/2009/04/20/Utiliser-NUT-pour-gèrer-son-onduleur)
je cite PHP car j'ai déjà des scripts en PHP pour la box domotique qui
tourne sur le NAS
--
Atschaw Fred
------------------------------------------
! Frederic Bressy !
! !
!www.crazygrimpeur.com !
------------------------------------------
Le souvenir des bienfaits reçus est fragile, comparé à l'ingratitude (Léonard de Vinci)
#!/bin/sh
# Copyright (c) 2008-2010 Synology Inc. All rights reserved.
if [ "x$1" = "x" -o "x$1" = "x-h" ]; then
echo "Copyright (c) 2008-2010 Synology Inc. All rights reserved."
echo "Usage: `basename $0` { online | lowbatt | nocomm | fsd }"
exit
fi
SYNOINFO="/etc/synoinfo.conf"
UPSMode=`/bin/get_key_value $SYNOINFO ups_mode`
RUN_HA=`get_key_value $SYNOINFO runha`
SZF_HA_RC="/usr/syno/synoha/etc.defaults/rc.ha"
SYNOBOOTBIN="/usr/syno/bin/synobootseq"
case "${UPSMode}" in
[Ss][Nn][Mm][Pp] | [Uu][Ss][Bb])
UPSMaster=1
EnabledKey="ups_enabled"
UPSMonServer="localhost"
;;
*)
UPSMaster=0
EnabledKey="upsslave_enabled"
UPSMonServer=`/bin/get_key_value /etc/synoinfo.conf upsslave_server`
if [ "x$UPSMonServer" = "x" ]; then
UPSMonServer="localhost"
elif [ 0 -lt `echo ${UPSMonServer}|grep -c ':'` ]; then
UPSMonServer="[${UPSMonServer}]"
fi
;;
esac
UPSEnabled=`/bin/get_key_value /etc/synoinfo.conf ${EnabledKey}`
case "$UPSEnabled" in
[Yy][Ee][Ss])
;;
*)
echo "UPS is not enable."
exit
;;
esac
UPSSafeShutdown=`/bin/get_key_value /etc/synoinfo.conf ups_safeshutdown`
case "${UPSSafeShutdown}" in
[Nn][Oo])
UPSSafeShutdown=0;;
*)
UPSSafeShutdown=1;;
esac
SZF_SAFEMODE="/tmp/ups.safedown"
SZF_SAFEMODE_DONE="/tmp/safeModeDone"
SYSLOG() {
logger -p user.err -t synoups "$1"
}
UPSStatusGet() {
ups_stat=`/usr/bin/upsc ups@${UPSMonServer} ups.status 2>/dev/null`
if [ $? -ne 0 ]; then
echo "ERR"
return 255
fi
for status in $ups_stat ; do
case "$status" in
"OL"|"OB"|"LB")
echo "$status"
return
;;
esac
done
echo "ERR"
}
UPSShutdown() {
if [ $UPSMaster -ne 1 ]; then
echo "Slave waits for safe shutdown" >> $SZF_SAFEMODE
touch /var/.NormalShutdown
SYSLOG "UPS waits for safe shutdown."
return
fi
OL=0
LB=0
while [ $OL -ne 2 -a $LB -ne 2 ]; do
sleep 10
St=`UPSStatusGet`
if [ "$St" = "OL" ]; then
OL=`expr $OL + 1`
LB=0
else
LB=`expr $LB + 1`
OL=0
fi
echo "OL=$OL LB=$LB" >> $SZF_SAFEMODE
done
if [ $OL -eq 2 ]; then
synologset1 sys warn 0x11300012
echo "UPS back to On-Line and reboot." >> $SZF_SAFEMODE
$SYNOBOOTBIN --unset-safe-shutdown
telinit 6
elif [ $LB -eq 2 ]; then
touch /var/.NormalShutdown
if [ $UPSSafeShutdown -eq 0 ]; then
echo "Waiting UPS exhausted." >> $SZF_SAFEMODE
SYSLOG "Waiting UPS exhausted."
else
echo "UPS safe shutdown." >> $SZF_SAFEMODE
SYSLOG "UPS safe shutdown."
/usr/bin/upsdrvctl shutdown
fi
fi
}
UPSSafeMode() {
if [ -f $SZF_SAFEMODE ]; then
return
fi
$SYNOBOOTBIN --is-shutdown
if [ $? -eq 0 ]; then
SYSLOG "[UPS] System is shutting down. Ignore onbattery event."
return
fi
SYSLOG "[UPS] Check Boot Status."
$SYNOBOOTBIN --is-ready
while [ $? -ne 0 ]
do
sleep 2
$SYNOBOOTBIN --is-ready
done
St=`UPSStatusGet`
if [ "$St" = "OL" ]; then
echo "WARNING: UPS is On-Line"
return
fi
echo "$1" > $SZF_SAFEMODE
/usr/syno/bin/synologset1 sys warn 0x11300011
SYSLOG "[UPS] Server is going to Safe Mode. It will stop all services and umount all volumes."
if [ "yes" = "$RUN_HA" ]; then
$SZF_HA_RC ups-safemode
fi
$SYNOBOOTBIN --set-safe-shutdown
reboot
sync; sync; sync;
echo "Stop all services and umount all volumes" >> $SZF_SAFEMODE
UPSShutdown
}
UPSRestart() {
if [ ! -f $SZF_SAFEMODE ]; then
return
fi
echo "UPS back on-line, so wait to reboot" >> $SZF_SAFEMODE
sleep 30
St=`UPSStatusGet`
timeout=$((3*60))
if [ "$St" = "OL" ]; then
SYSLOG "[UPS] Check Safe Mode Done."
while [ ! -f $SZF_SAFEMODE_DONE ] && [ $timeout -gt 0 ]
do
sleep 2
timeout=`expr $timeout - 2`
done
if [ "yes" = "$RUN_HA" ]; then
$SZF_HA_RC ups-restart &
fi
synologset1 sys warn 0x11300012
SYSLOG "UPS back to On-Line and reboot."
$SYNOBOOTBIN --unset-safe-shutdown
telinit 6
fi
}
FLOCK_FILE="/tmp/synoups.lock"
{
flock -x 99
case "$1" in
online)
UPSRestart
;;
lowbatt | nocomm)
UPSSafeMode $1
;;
fsd)
/usr/sbin/upsmon -c fsd
UPSSafeMode $1
;;
esac
flock -u 99
} 99>$FLOCK_FILE
