Bonjour Christian,
Effectivement, il y a un vingtaine d'erreurs. Voici le résultat de la commande smartctl -a /dev/sdx.
Je ne sais pas par contre interprêter ces messages.
Merci,
Gédéon Légaut
======================
<fichier>
======================
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-6-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 20 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 occurred at disk power-on lifetime: 7458 hours (310 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 70 ff ff ff ef 00 00:05:09.625 READ DMA EXT
25 00 08 ff ff ff ef 00 00:05:09.624 READ DMA EXT
25 00 08 ff ff ff ef 00 00:05:09.598 READ DMA EXT
25 00 80 ff ff ff ef 00 00:05:09.587 READ DMA EXT
ea 00 00 ff ff ff af 00 00:05:09.571 FLUSH CACHE EXT
Error 19 occurred at disk power-on lifetime: 7458 hours (310 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 00:05:01.470 READ DMA EXT
27 00 00 00 00 00 e0 00 00:05:01.470 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:05:01.463 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 00:05:01.457 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:05:01.457 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 18 occurred at disk power-on lifetime: 7458 hours (310 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 00:04:52.661 READ DMA EXT
25 00 00 ff ff ff ef 00 00:04:52.659 READ DMA EXT
25 00 00 ff ff ff ef 00 00:04:52.657 READ DMA EXT
25 00 00 ff ff ff ef 00 00:04:52.653 READ DMA EXT
25 00 00 ff ff ff ef 00 00:04:52.648 READ DMA EXT
Error 17 occurred at disk power-on lifetime: 7458 hours (310 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 ff ff ff ef 00 00:00:22.057 READ DMA EXT
ea 00 00 ff ff ff af 00 00:00:22.040 FLUSH CACHE EXT
35 00 08 ff ff ff ef 00 00:00:22.040 WRITE DMA EXT
ea 00 00 ff ff ff af 00 00:00:22.014 FLUSH CACHE EXT
35 00 98 ff ff ff ef 00 00:00:22.013 WRITE DMA EXT
Error 16 occurred at disk power-on lifetime: 7458 hours (310 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff ef 00 00:00:16.205 READ DMA EXT
25 00 00 ff ff ff ef 00 00:00:16.200 READ DMA EXT
25 00 00 ff ff ff ef 00 00:00:16.195 READ DMA EXT
25 00 00 ff ff ff ef 00 00:00:16.192 READ DMA EXT
25 00 00 ff ff ff ef 00 00:00:16.183 READ DMA EXT
======================
</fichier>
======================
----- Mail original -----
De: "Christian Marillat" <marillat@???>
À: guilde@???
Envoyé: Mercredi 29 Janvier 2020 08:08:26
Objet: Re: partition /home ne se monte plus
On 28 janv. 2020 21:24, gedeon.legaut@??? wrote:
> Je ferais le test smarctl en début de semaine prochaine, je n'aurais pas le temps avant.
> Je regarderais pour brancher le disque ailleurs aussi.
Déjà regarder ce qu'il y a dans le log SMART et la "Attributes Data
Structure" sachant que chaque test va détruire un peu plus le disque.
smartctl -a /dev/sdx
Christian
