bonjour,
Je reviens et je viens de me rendre compte que j'ai des logs de smartctl
depuis quelques jours toutes les 30 mn.
Jun 9 19:49:09 tux smartd[2248]: Device: /dev/sda [SAT], 1 Currently
unreadable (pending) sectors
Jun 9 20:19:09 tux smartd[2248]: Device: /dev/sda [SAT], 1 Currently
unreadable (pending) sectors
J'ai lancé cette commande :
------------
# smartctl -a /dev/sda
smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-754.14.2.el6.x86_64]
(local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST500LM012 HN-M500MBB
Serial Number: S2ZYJ9EFB04938
LU WWN Device Id: 5 0004cf 20e9041e4
Firmware Version: 2BA30001
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Jun 9 21:14:55 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 121) The previous self-test completed
having
the read element of the test
failed.
Total time to complete Offline
data collection: ( 6780) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 113) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail
Always - 277
2 Throughput_Performance 0x0026 252 252 000 Old_age
Always - 0
3 Spin_Up_Time 0x0023 094 093 025 Pre-fail
Always - 2121
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 42
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age
Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 37390
10 Spin_Retry_Count 0x0032 252 252 051 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 698
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 42
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always
- 2
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always
- 8
194 Temperature_Celsius 0x0002 058 051 000 Old_age Always
- 42 (Min/Max 22/49)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always
- 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always
- 295419
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always
- 698
225 Load_Cycle_Count 0x0032 001 001 000 Old_age Always
- 9047003
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 37377
964675008
# 2 Short offline Completed: read failure 90% 37377
964675008
# 3 Short offline Completed without error 00% 28322
-
# 4 Short offline Completed without error 00% 25558
-
# 5 Short offline Completed without error 00% 25555
-
# 6 Short offline Completed without error 00% 15372
-
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------
# fdisk -l /dev/sda
Disque /dev/sda: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Identifiant de disque : 0x000b1426
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 32 256000 fd Linux raid
autodetect
La partition 1 ne se termine pas sur une frontière de cylindre.
/dev/sda2 32 634 4833280 82 Linux swap / Solaris
La partition 2 ne se termine pas sur une frontière de cylindre.
/dev/sda3 634 60802 483296256 83 Linux
------------
C'est le disque de mon serveur sous centos.
Que faire?
e2fsck?
merci
Anne