Le 27/11/2018 à 22:39, Olivier Allard-Jacquin a écrit :
> Bonsoir,
>
> Le 27/11/2018 à 22:07, Haricophile a écrit :
>> Le Tue, 27 Nov 2018 13:39:18 +0100,
>> "anne.guilde@???" <anne.guilde@???> a écrit :
>>
>>
>>> - Je me demande la différence entre e2fsck et fsck.
>>
>> fsck appelle normalement le bon programme selon le type de système de
>> fichier. Mais appeler le bon programme fonctionne aussi.
>>
>>> - Lors de la commande fsck j'ai mis les options -yfv trouvé sur ubuntu
>>> Bonne idée ou pas ?
>>
>> Je me méfie beaucoup de forcer "yes" (-y) pour vérifier un système de
>> fichier... il y a des logs mais bon.
>>
>>> - Le disque commence a avoir des vrais soucis ou pas?
>>
>> Tant que c'est un problème de système de fichier c'est du logique, mais erreur
>> entrée-sortie ça sent moins bon, c'est du physique. A surveiller de près. smart
>> peut effectivement donner des infos utiles.
>
> Le
> Device: /dev/sda [SAT], 24 Currently unreadable (pending) sectors
>
> sent mauvais.
>
> Il faudrait avoir le tableau "smartctrl -a" en intégralité.
>
> Quelque chose du genre :
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 115 081 006 Pre-fail Always
> - 92749407
> 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always
> - 0
> 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always
> - 4911
> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
> - 0
> 7 Seek_Error_Rate 0x000f 056 043 030 Pre-fail Always
> - 6735238099890
> 9 Power_On_Hours 0x0032 082 082 000 Old_age Always
> - 16194
> 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
> - 0
> 12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always
> - 5047
> 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
> - 0
> 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
> - 0
> 190 Airflow_Temperature_Cel 0x0022 070 060 045 Old_age Always
> - 30 (Min/Max 20/31)
> 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always
> - 30 (0 16 0 0 0)
> 195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age Always
> - 119878279
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
> - 0
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age Always
> - 242
> 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
> Offline - 0
> 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always
> - 0
>
le dernier smartctl avec sda démonté fait tout à l'heure.
----
# smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 7K1000
Device Model: HGST HTS721010A9E630
Serial Number: JR10004M1RN3VE
LU WWN Device Id: 5 000cca 8a8d86336
Firmware Version: JB0OA3U0
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 28 00:40:26 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 170) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 160 160 040 Pre-fail
Offline - 100
3 Spin_Up_Time 0x0007 153 153 033 Pre-fail
Always - 2
4 Start_Stop_Count 0x0012 100 100 000 Old_age
Always - 438
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 138 138 040 Pre-fail
Offline - 34
9 Power_On_Hours 0x0012 075 075 000 Old_age
Always - 11094
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 185
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 18
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always
- 17322
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always
- 35 (Min/Max 13/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 87 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 87 occurred at disk power-on lifetime: 10982 hours (457 days + 14
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 10 c1 05 Error: UNC at LBA = 0x05c11048 = 96538696
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e0 48 10 c1 40 00 01:17:35.578 READ FPDMA QUEUED
61 08 d0 00 08 84 40 00 01:17:35.578 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:17:35.578 SET FEATURES [Enable SATA
feature]
27 00 00 00 00 00 e0 00 01:17:35.578 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:17:35.577 IDENTIFY DEVICE
Error 86 occurred at disk power-on lifetime: 10982 hours (457 days + 14
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 10 c1 05 Error: UNC at LBA = 0x05c11048 = 96538696
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 48 10 c1 40 00 01:17:32.640 READ FPDMA QUEUED
60 08 a8 40 10 c1 40 00 01:17:32.640 READ FPDMA QUEUED
60 08 a0 38 10 c1 40 00 01:17:32.640 READ FPDMA QUEUED
60 08 98 30 10 c1 40 00 01:17:32.640 READ FPDMA QUEUED
60 08 90 28 10 c1 40 00 01:17:32.640 READ FPDMA QUEUED
Error 85 occurred at disk power-on lifetime: 10982 hours (457 days + 14
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 48 10 c1 05 Error: UNC at LBA = 0x05c11048 = 96538696
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 70 2a 81 40 00 01:17:29.480 READ FPDMA QUEUED
60 08 f0 68 2a 81 40 00 01:17:29.480 READ FPDMA QUEUED
60 08 e8 60 2a 81 40 00 01:17:29.475 READ FPDMA QUEUED
60 08 e0 58 2a 81 40 00 01:17:29.475 READ FPDMA QUEUED
60 08 d8 50 2a 81 40 00 01:17:29.459 READ FPDMA QUEUED
Error 84 occurred at disk power-on lifetime: 10982 hours (457 days + 14
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 08 c0 05 Error: UNC at LBA = 0x05c008a0 = 96471200
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 e8 a0 08 c0 40 00 01:17:24.434 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:17:24.434 SET FEATURES [Enable SATA
feature]
27 00 00 00 00 00 e0 00 01:17:24.434 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:17:24.433 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:17:24.433 SET FEATURES [Set transfer
mode]
Error 83 occurred at disk power-on lifetime: 10982 hours (457 days + 14
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 08 c0 05 Error: UNC at LBA = 0x05c008a0 = 96471200
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 60 a0 08 c0 40 00 01:17:21.494 READ FPDMA QUEUED
60 10 58 30 08 c0 40 00 01:17:21.494 READ FPDMA QUEUED
60 08 40 98 08 c0 40 00 01:17:21.454 READ FPDMA QUEUED
60 10 30 a8 08 c0 40 00 01:17:21.454 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:17:21.454 SET FEATURES [Enable SATA
feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11070
-
# 2 Extended offline Completed without error 00% 11054
-
# 3 Short offline Completed without error 00% 11046
-
# 4 Short offline Completed without error 00% 11022
-
# 5 Short offline Completed without error 00% 10998
-
# 6 Short offline Completed without error 00% 10995
-
# 7 Short offline Completed without error 00% 10995
-
# 8 Short offline Completed without error 00% 10989
-
# 9 Short offline Completed without error 00% 10982
-
#10 Short offline Completed without error 00% 10982
-
#11 Short offline Completed without error 00% 10974
-
#12 Short offline Completed without error 00% 10950
-
#13 Short offline Completed without error 00% 10926
-
#14 Short offline Completed without error 00% 10902
-
#15 Extended offline Completed: read failure 80% 10881
364906504
#16 Short offline Completed without error 00% 10878
-
#17 Short offline Completed without error 00% 10854
-
#18 Short offline Completed without error 00% 10830
-
#19 Short offline Completed without error 00% 10806
-
#20 Short offline Completed without error 00% 10782
-
#21 Short offline Completed without error 00% 10758
-
1 of 1 failed self-tests are outdated by newer successful extended
offline self-test # 2
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----
J'ai contacté WD après la réparation du disque avec fsck.
Il m'ont envoyé un mail pour tester le disque :
Vous pouvez teste le disque en utilisant le lien suivant : Tester un
disque dur à l’aide de Data Lifeguard Diagnostics pour Windows :
https://support.wdc.com/knowledgebase/answer.aspx?ID=4838&lang=fr
J'ai un disque windows 10 que j'ai mis dans un dock usb et j'ai booté avec.
Le test ne montre aucune erreur...
Que pensez vous du résultat de smartctl?
Merci
Anne
