La datasheet du LM983x :
www.ti.com/lit/ds/symlink/lm9833.pdf
La liste des registres se trouve aux pages 11 à 21.
Un registre, c'est un peu comme une cellule mémoire, mais dont le
contenu est lié au circuit électronique environnant,
- soit pour le régler et le commander (registre de contrôle, accessible
en lecture/écriture),
- soit pour rendre compte de son état (registre de statut, accessible en
lecture seule).
Dans le cas du LM983x, le registre à l'adresse 0x69 contient un numéro
de version, c'est probablement en lisant ce registre que la version 32
bits de sane-find-scanner arrive à déterminer qu'il s'agit d'un LM9832
ou LM9833. Mais pourquoi la version 64 bits n'y arrive pas ?????
--
Nicolas Rougnon-Glasson
Le 08/10/2017 à 16:57, anne.guilde@??? a écrit :
> Le 11/08/2017 à 19:07, anne.guilde@??? a écrit :
>> Le 08/08/2017 à 17:18, anne.guilde@??? a écrit :
>>> bonjour,
>>>
>>> J'ai mis sane sur mon serveur pour pouvoir scanner.
>>>
>>> J'ai 2 serveurs, un en 32 bits et l'autre en 64.
>>>
>>> Depuis une maj, impossible d'accès au scanner sur celui en 64 bits.
>>> J'avais donc brancher le scanner usb sur celui en 32 bits
>>>
>>> Les commandes :
>>> ---
>>> # sane-find-scanner
>>>
>>> # sane-find-scanner will now attempt to detect your scanner. If the
>>> # result is different from what you expected, first make sure your
>>> # scanner is powered up and properly connected to your computer.
>>>
>>> # No SCSI scanners found. If you expected something different,
>>> make sure that
>>> # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>
>>> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON
>>> Scanner 010F], chip=LM9832/3) at libusb:003:017
>>> found USB scanner (vendor=0x0bda [Generic], product=0x0129
>>> [USB2.0-CRW]) at libusb:001:004
>>> # Your USB scanner was (probably) detected. It may or may not be
>>> supported by
>>> # SANE. Try scanimage -L and read the backend's manpage.
>>>
>>> # Not checking for parallel port scanners.
>>>
>>> # Most Scanners connected to the parallel port or other
>>> proprietary ports
>>> # can't be detected by this program.
>>> ----
>>>
>>> Il a bien trouvé mon scanner
>>> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
>>>
>>> ---
>>> # scanimage -L
>>>
>>> No scanners were identified. If you were expecting something different,
>>> check that the scanner is plugged in, turned on and detected by the
>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>> which came with this software (README, FAQ, manpages).
>>> ---
>>>
>>> Il ne le trouve plus.
>>>
>>> Sur le serveur 32 bits
>>> ---
>>> ]# scanimage -L
>>> device `plustek:libusb:002:004' is a Epson Perfection 1250/Photo
>>> flatbed scanner
>>> ---
>>>
>>> Je suis en train d'essayer de comprendre le problème.
>>>
>>> sur le serveur en 32 bits
>>> ---
>>> # sane-find-scanner -v -v
>>> ...
>>> <device descriptor of 0x04b8/0x010f at 002:003 (EPSON EPSON Scanner
>>> 010F)>
>>> bLength 18
>>> bDescriptorType 1
>>> bcdUSB 1.10
>>> bDeviceClass 255
>>> bDeviceSubClass 0
>>> bDeviceProtocol 255
>>> bMaxPacketSize0 8
>>> idVendor 0x04B8
>>> idProduct 0x010F
>>> bcdDevice 1.00
>>> iManufacturer 1 (EPSON)
>>> iProduct 2 (EPSON Scanner 010F)
>>> iSerialNumber 0 ()
>>> bNumConfigurations 1
>>> <configuration 0>
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 39
>>> bNumInterfaces 1
>>> bConfigurationValue 1
>>> iConfiguration 0 ()
>>> bmAttributes 192 (Self-powered)
>>> MaxPower 2 mA
>>> <interface 0>
>>> <altsetting 0>
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 3
>>> bInterfaceClass 255
>>> bInterfaceSubClass 0
>>> bInterfaceProtocol 255
>>> iInterface 0 ()
>>> <endpoint 0>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x81 (in 0x01)
>>> bmAttributes 3 (interrupt)
>>> wMaxPacketSize 1
>>> bInterval 16 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>> <endpoint 1>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x82 (in 0x02)
>>> bmAttributes 2 (bulk)
>>> wMaxPacketSize 64
>>> bInterval 0 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>> <endpoint 2>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x03 (out 0x03)
>>> bmAttributes 2 (bulk)
>>> wMaxPacketSize 64
>>> bInterval 0 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>>
>>> <trying to find out which USB chip is used>
>>> checking for GT-6801 ...
>>> this is not a GT-6801 (bDeviceSubClass = 0x0)
>>> checking for GT-6816 ...
>>> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
>>> checking for GT-8911 ...
>>> this is not a GT-8911 (check 1, bDeviceClass = 255,
>>> bInterfaceClass = 255)
>>> checking for MA-1017 ...
>>> this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
>>> checking for MA-1015 ...
>>> this is not a MA-1015 (bcdUSB = 0x110)
>>> checking for MA-1509 ...
>>> this is not a MA-1509 (bDeviceSubClass = 0x0)
>>> checking for LM983[1,2,3] ...
>>> <This USB chip looks like a LM9832/3 (result from sane-backends
>>> 1.0.21)>
>>>
>>> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON
>>> Scanner 010F], chip=LM9832/3) at libusb:002:003
>>> ...
>>> ---
>>>
>>> il a trouvé le chip LM9832/3.
>>>
>>> sur le serveur 64 bits
>>> ----
>>> # sane-find-scanner -v -v
>>> ...
>>> <device descriptor of 0x04b8/0x010f at 003:015 (EPSON EPSON Scanner
>>> 010F)>
>>> bLength 18
>>> bDescriptorType 1
>>> bcdUSB 1.10
>>> bDeviceClass 255
>>> bDeviceSubClass 0
>>> bDeviceProtocol 255
>>> bMaxPacketSize0 8
>>> idVendor 0x04B8
>>> idProduct 0x010F
>>> bcdDevice 1.00
>>> iManufacturer 1 (EPSON)
>>> iProduct 2 (EPSON Scanner 010F)
>>> iSerialNumber 0 ()
>>> bNumConfigurations 1
>>> <configuration 0>
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 39
>>> bNumInterfaces 1
>>> bConfigurationValue 1
>>> iConfiguration 0 ()
>>> bmAttributes 192 (Self-powered)
>>> MaxPower 2 mA
>>> <interface 0>
>>> <altsetting 0>
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 3
>>> bInterfaceClass 255
>>> bInterfaceSubClass 0
>>> bInterfaceProtocol 255
>>> iInterface 0 ()
>>> <endpoint 0>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x81 (in 0x01)
>>> bmAttributes 3 (interrupt)
>>> wMaxPacketSize 1
>>> bInterval 16 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>> <endpoint 1>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x82 (in 0x02)
>>> bmAttributes 2 (bulk)
>>> wMaxPacketSize 64
>>> bInterval 0 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>> <endpoint 2>
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x03 (out 0x03)
>>> bmAttributes 2 (bulk)
>>> wMaxPacketSize 64
>>> bInterval 0 ms
>>> bRefresh 0
>>> bSynchAddress 0
>>>
>>> <trying to find out which USB chip is used>
>>> checking for GT-6801 ...
>>> this is not a GT-6801 (bDeviceSubClass = 0x0)
>>> checking for GT-6816 ...
>>> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
>>> checking for GT-8911 ...
>>> this is not a GT-8911 (check 1, bDeviceClass = 255,
>>> bInterfaceClass = 255)
>>> checking for MA-1017 ...
>>> this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
>>> checking for MA-1015 ...
>>> this is not a MA-1015 (bcdUSB = 0x110)
>>> checking for MA-1509 ...
>>> this is not a MA-1509 (bDeviceSubClass = 0x0)
>>> checking for LM983[1,2,3] ...
>>> Couldn't access LM983x registers.
>>> checking for GL646 ...
>>> this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
>>> checking for GL646_HP ...
>>> this is not a GL646_HP (bDeviceSubClass = 0x0)
>>> checking for GL660+GL646 ...
>>> this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass
>>> = 255)
>>> checking for GL84x ...
>>> this is not a GL84x (bcdUSB = 0x110)
>>> checking for ICM532B ...
>>> this is not a ICM532B (check 3, bDeviceSubClass = 0x0)
>>> checking for PV8630/LM9830 ...
>>> this is not a PV8630/LM9830 (bDeviceClass = 255)
>>> checking for M011 ...
>>> this is not a M011 (bcdUSB = 0x110)
>>> checking for RTS8822 ...
>>> this is not a RTS8822 (bDeviceClass = 255)
>>> checking for rts8858c ...
>>> this is not a rts8858c (bDeviceClass = 255)
>>> checking for SQ113 ...
>>> this is not a SQ113 (bDeviceClass = 255)
>>> checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ...
>>> this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset
>>> (bcdUSB = 0x110)
>>> checking for rts8801/rts8891 ...
>>> this is not a rts8801/rts8891 (bDeviceClass = 255)
>>> <Couldn't determine the type of the USB chip (result from
>>> sane-backends 1.0.21)>
>>>
>>> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON
>>> Scanner 010F]) at libusb:003:015
>>> ...
>>> ---
>>>
>>> Il ne trouve pas le chip
>>> checking for LM983[1,2,3] ...
>>> Couldn't access LM983x registers.
>>>
>>> c'est quoi un register et pourquoi il n'y aurait pas accès
>>>
>>> Si quelqu'un a une idée pour continuer les recherches...
>>>
>
> Je reviens sur mon problème avec sane
> Couldn't access LM983x registers.
>
> Pourquoi avec mon serveur en 64 bits il n'a pas accès au registers
> et un registers c'est quoi et comment cela fonctionne
>
> merci
> Anne
>
>
>
