Le 08/08/2017 à 17:18, anne.guilde@??? a écrit :
> bonjour,
>
> J'ai mis sane sur mon serveur pour pouvoir scanner.
>
> J'ai 2 serveurs, un en 32 bits et l'autre en 64.
>
> Depuis une maj, impossible d'accès au scanner sur celui en 64 bits.
> J'avais donc brancher le scanner usb sur celui en 32 bits
>
> Les commandes :
> ---
> # sane-find-scanner
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> # No SCSI scanners found. If you expected something different, make
> sure that
> # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
> 010F], chip=LM9832/3) at libusb:003:017
> found USB scanner (vendor=0x0bda [Generic], product=0x0129 [USB2.0-CRW])
> at libusb:001:004
> # Your USB scanner was (probably) detected. It may or may not be
> supported by
> # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary
> ports
> # can't be detected by this program.
> ----
>
> Il a bien trouvé mon scanner
> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
>
> ---
> # scanimage -L
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> ---
>
> Il ne le trouve plus.
>
> Sur le serveur 32 bits
> ---
> ]# scanimage -L
> device `plustek:libusb:002:004' is a Epson Perfection 1250/Photo flatbed
> scanner
> ---
>
> Je suis en train d'essayer de comprendre le problème.
>
> sur le serveur en 32 bits
> ---
> # sane-find-scanner -v -v
> ...
> <device descriptor of 0x04b8/0x010f at 002:003 (EPSON EPSON Scanner 010F)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 255
> bDeviceSubClass 0
> bDeviceProtocol 255
> bMaxPacketSize0 8
> idVendor 0x04B8
> idProduct 0x010F
> bcdDevice 1.00
> iManufacturer 1 (EPSON)
> iProduct 2 (EPSON Scanner 010F)
> iSerialNumber 0 ()
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 2 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255
> bInterfaceSubClass 0
> bInterfaceProtocol 255
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 16 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 (out 0x03)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceSubClass = 0x0)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass
> = 255)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bcdUSB = 0x110)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceSubClass = 0x0)
> checking for LM983[1,2,3] ...
> <This USB chip looks like a LM9832/3 (result from sane-backends 1.0.21)>
>
> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
> 010F], chip=LM9832/3) at libusb:002:003
> ...
> ---
>
> il a trouvé le chip LM9832/3.
>
> sur le serveur 64 bits
> ----
> # sane-find-scanner -v -v
> ...
> <device descriptor of 0x04b8/0x010f at 003:015 (EPSON EPSON Scanner 010F)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 255
> bDeviceSubClass 0
> bDeviceProtocol 255
> bMaxPacketSize0 8
> idVendor 0x04B8
> idProduct 0x010F
> bcdDevice 1.00
> iManufacturer 1 (EPSON)
> iProduct 2 (EPSON Scanner 010F)
> iSerialNumber 0 ()
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 2 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255
> bInterfaceSubClass 0
> bInterfaceProtocol 255
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 16 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 (out 0x03)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceSubClass = 0x0)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass
> = 255)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bcdUSB = 0x110)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceSubClass = 0x0)
> checking for LM983[1,2,3] ...
> Couldn't access LM983x registers.
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceSubClass = 0x0)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GL84x ...
> this is not a GL84x (bcdUSB = 0x110)
> checking for ICM532B ...
> this is not a ICM532B (check 3, bDeviceSubClass = 0x0)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bDeviceClass = 255)
> checking for M011 ...
> this is not a M011 (bcdUSB = 0x110)
> checking for RTS8822 ...
> this is not a RTS8822 (bDeviceClass = 255)
> checking for rts8858c ...
> this is not a rts8858c (bDeviceClass = 255)
> checking for SQ113 ...
> this is not a SQ113 (bDeviceClass = 255)
> checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ...
> this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bcdUSB =
> 0x110)
> checking for rts8801/rts8891 ...
> this is not a rts8801/rts8891 (bDeviceClass = 255)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.21)>
>
> found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
> 010F]) at libusb:003:015
> ...
> ---
>
> Il ne trouve pas le chip
> checking for LM983[1,2,3] ...
> Couldn't access LM983x registers.
>
> c'est quoi un register et pourquoi il n'y aurait pas accès
>
> Si quelqu'un a une idée pour continuer les recherches...
>
> merci
> anne
>
Je re poste ce message que je ne vois pas dans la liste.
Si quelqu'un avait une idée
merc
Anne
