Bonjour !
Bon çà a compilé !
Le module est bien présent.
Il a suffit de faire un grand coup de ménage dans les différents
noyaux qui traînaient par là après quelques années de mises à jour,
nvidia etc ...
Par contre, çà marche pas ...
le fameux module em2880 est bien chargé au branchement. le syslog :
kernel: usb 3-2: new high speed USB device using ehci_hcd and address 2
kernel: usb 3-2: configuration #1 chosen from 1 choice
kernel: Linux video capture interface: v2.00
kernel: em28xx v4l2 driver version 0.0.1 loaded
kernel: em28xx new video device (0ccd:005e): interface 0, class 255
kernel: em28xx: device is attached to a USB 2.0 bus
kernel: em28xx: you're using the experimental/unstable tree from
mcentral.de
kernel: em28xx: there's also a stable tree available but which is
limited to
kernel: em28xx: linux <=2.6.19.2
kernel: em28xx: it's fine to use this driver but keep in mind that it
will move
kernel: em28xx: to
http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon
as it's
kernel: em28xx: proved to be stable
kernel: em28xx #0: Alternate settings: 8
kernel: em28xx #0: Alternate setting 0, max size= 0
kernel: em28xx #0: Alternate setting 1, max size= 0
kernel: em28xx #0: Alternate setting 2, max size= 1448
kernel: em28xx #0: Alternate setting 3, max size= 2048
kernel: em28xx #0: Alternate setting 4, max size= 2304
kernel: em28xx #0: Alternate setting 5, max size= 2580
kernel: em28xx #0: Alternate setting 6, max size= 2892
kernel: em28xx #0: Alternate setting 7, max size= 3072
kernel: input: em2880/em2870 remote control as /class/input/input3
kernel: em28xx-input.c: remote control handler attached
kernel: attach_inform: eeprom detected.
kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03
kernel: em28xx #0: i2c eeprom f0: 33 00 32 00 31 00 39 00 00 00 00 00
00 00 00 00
...........
kernel: EEPROM ID= 0x9567eb1a
kernel: Vendor/Product ID= 0ccd:005e
kernel: AC97 audio (5 sample rates)
kernel: 500mA max power
kernel: Table at 0x27, strings=0x409e, 0x1cde, 0x346a
kernel: tuner 1-0061: chip found @ 0xc2 (em28xx #0)
kernel: attach inform (default): detected I2C address c2
/tmp/v4l-dvb-kernel-55d60e988b89/v4l/tuner-core.c: setting tuner
callback
kernel: tuner 0x61: Configuration acknowledged
kernel: /tmp/v4l-dvb-kernel-55d60e988b89/v4l/tuner-core.c: setting
tuner callback
kernel: /tmp/v4l-dvb-kernel-55d60e988b89/v4l/xc3028-tuner.c: attach
request!
kernel: /tmp/v4l-dvb-kernel-55d60e988b89/v4l/tuner-core.c: xc3028
tuner successfully loaded
kernel: attach_inform: tvp5150 detected.
kernel: tvp5150 1-005c: tvp5150am1 detected.
kernel: Loading base firmware: xc3028_init0.i2c.fw
kernel: Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
kernel: xc3028-tuner.c: firmware 2.7
kernel: ANALOG TV REQUEST
kernel: em28xx #0: V4L2 VBI device registered as /dev/vbi0
kernel: em28xx #0: V4L2 device registered as /dev/video0
kernel: em28xx #0: Found Terratec Hybrid XS (em2882)
kernel: usbcore: registered new driver em28xx
kernel: em28xx-audio.c: probing for em28x1 non standard usbaudio
kernel: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
kernel: Em28xx: Initialized (Em28xx Audio Extension) extension
kernel: em2880-dvb.c: DVB Init
kernel: Loading base firmware: xc3028_8MHz_init0.i2c.fw
kernel: Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw
kernel: xc3028-tuner.c: firmware 2.7
kernel: Sending extra call for Digital TV!
kernel: /tmp/v4l-dvb-kernel-55d60e988b89/v4l/xc3028-tuner.c: attach
request!
kernel: DVB: registering new adapter (em2880 DVB-T)
kernel: DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
kernel: Em28xx: Initialized (Em2880 DVB Extension) extension
kernel: Loading base firmware: xc3028_8MHz_init0.i2c.fw
kernel: Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
kernel: xc3028-tuner.c: firmware 2.7
kernel: Sending extra call for Digital TV!
kernel: DIGITAL TV REQUEST
infinity last message repeated 23 times
Et là, çà va plus ... le gadget ne trouve rien là ou le T2 du même
fabriquant fonctionnais très bien.
Le SNR de Kaffeine reste désespérément à 0%
Le firmware est bien (je crois) celui pour la France :
http://mcentral.de/wiki/index.php5/Em2880#Firmware
Sur ce site :
http://www.mjc-athena.org/mediawiki/index.php/TNT_Linux
je lis :
"Récupérer le fichier emBDA.sys présent à la racine du CDROM"
Mais il n'y est pas :(
Est-ce que çà a à voir avec le firmware ?
L'outil de recherche de canaux me propose déjà Grenoble.
Je me perd en conjectures.
RV2D
