Bonsoir,
> # ifup wlan0 --verbose
> Configuring interface wlan0=wlan0 (inet)
> run-parts --verbose /etc/network/if-pre-up.d
> run-parts: executing /etc/network/if-pre-up.d/wireless-tools
> run-parts: executing /etc/network/if-pre-up.d/wpasupplicant
> wpa_supplicant: wpa-driver ndiswrapper
> wpa_supplicant: /sbin/wpa_supplicant -B -P /var/run/wpa_supplicant.wlan0.pid -i
> wlan0 -D ndiswrapper -C /var/run/wpa_supplicant
> Starting /sbin/wpa_supplicant...
> wpa_supplicant: ctrl_interface socket located
> at /var/run/wpa_supplicant/wlan0
> wpa_supplicant: configuring network block -- 0
> wpa_supplicant: wpa-ssid "xxx" -- OK
> wpa_supplicant: wpa-psk ***** -- OK
> wpa_supplicant: wpa-key-mgmt WPA-PSK -- OK
> wpa_supplicant: enabling network block 0 -- OK
>
> ifconfig wlan0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255 up
> route add default gw 192.168.0.254 wlan0
> run-parts --verbose /etc/network/if-up.d
> run-parts: executing /etc/network/if-up.d/mountnfs
> run-parts: executing /etc/network/if-up.d/ntpdate
> run-parts: executing /etc/network/if-up.d/wpasupplicant
>
> Côté AP, je pense que tout est bon, car je le vois bien :
>
> # iwlist wlan0 scan
> wlan0 Scan completed :
> Cell 01 - Address: 06:0F:B5:90:59:D9
> ESSID:"xxx"
> Protocol:IEEE 802.11g
> Mode:Managed
> Frequency:2.462 GHz (Channel 11)
> Quality:60/100 Signal level:-57 dBm Noise level:-96 dBm
> Encryption key:on
> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
> 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
> 48 Mb/s; 54 Mb/s
> Extra:bcn_int=100
> Extra:atim=1
> IE: WPA Version 1
> Group Cipher : TKIP
> Pairwise Ciphers (1) : TKIP
> Authentication Suites (1) : PSK
>
C'est bizarre, tout a l'air bon. Que te donne un iwconfig wlan0 ?
Mike
