Salut,
il me semble me rappeler que lorsque je tatonnais avec ça pour trouver
quel était le bon module, ça foirait si tous les modules étaient chargés
en même temps. Donc ce que j'avais fait c'est que j'avais chargé les
modules i2c nécessaires (i2c_core et i2c_viapro ici) puis j'avais essayé
un par un les modules des senseurs en les chargeant et déchargeant.
(pour finalement trouver que c'était asb100).
Bon courage,
Mathieu.
On Wed, Aug 16, 2006 at 02:51:58PM +0200, Frédéric wrote:
> Bonjour,
>
> Je n'arrive pas à faire marcher lm-sensors. sensors-detect m'a trouvé tout
> un tas de capteurs (j'ai mis uniquement les valides) :
>
> Next adapter: MAVEN:fb0
> Client found at address 0x1c
> Probing for `Philips Semiconductors PCA9556'... Success!
> (confidence 1, driver `to-be-written')
>
> Next adapter: DDC:fb0 #1
> Client found at address 0x50
> Probing for `SPD EEPROM'... Success!
> (confidence 1, driver `eeprom')
> Probing for `DDC monitor'... Success!
> (confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54
> 0x55 0x56 0x57
>
> Next adapter: DDC:fb0 #0
> Client found at address 0x50
> Probing for `SPD EEPROM'... Success!
> (confidence 1, driver `eeprom')
> Probing for `DDC monitor'... Success!
> (confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54
> 0x55 0x56 0x57
>
> Next adapter: SMBus I801 adapter at dcd0
> Client found at address 0x30
> Client found at address 0x31
> Client found at address 0x50
> Probing for `SPD EEPROM'... Success!
> (confidence 8, driver `eeprom')
> Client found at address 0x51
> Probing for `SPD EEPROM'... Success!
> (confidence 8, driver `eeprom')
>
> Some Super I/O chips may also contain sensors. Super I/O probes are
> typically a bit more dangerous, as we have to write to I/O ports to do
> this. This is usually safe though.
>
> Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
> Success... found at address 0x0c30
> Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
> Success... found at address 0x0c40
> Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
> Success... found at address 0x0c50
>
> Il a chargé plein de modules (et modifié mon /etc/modules) :
>
> # Generated by sensors-detect on Wed Aug 16 14:37:34 2006
> # I2C adapter drivers
> # modprobe unknown adapter MAVEN:fb0
> i2c-matroxfb
> i2c-i801
> i2c-isa
> # I2C chip drivers
> # no driver for Philips Semiconductors PCA9556 yet
> eeprom
> pc87360
>
> Maintenant, lorsque je lance sensors, j'obtiens :
>
> Can't access procfs/sysfs file
> Unable to find i2c bus information;
> For 2.6 kernels, make sure you have mounted sysfs and libsensors
> was compiled with sysfs support!
>
> Or sysfs est bien monté. Quel est le problème ? Manque-t-il encore des
> modules ?
>
> --
> Frédéric
>
> http://www.gbiloba.org
>
--
If a function be advertised to return an error code in the event of
difficulties, thou shalt check for that code, yea, even though the
checks triple the size of thy code and produce aches in thy typing
fingers, for if thou thinkest "it cannot happen to me," the gods shall
surely punish thee for thy arrogance.
