lm-sensors

Page principale

Répondre à ce message
Auteur: Frédéric
Date:  
À: ML Guilde
Sujet: lm-sensors
Bonjour,

Je n'arrive pas à faire marcher lm-sensors. sensors-detect m'a trouvé tout
un tas de capteurs (j'ai mis uniquement les valides) :

Next adapter: MAVEN:fb0
Client found at address 0x1c
Probing for `Philips Semiconductors PCA9556'... Success!
    (confidence 1, driver `to-be-written')


Next adapter: DDC:fb0 #1
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
    (confidence 1, driver `eeprom')
Probing for `DDC monitor'... Success!
    (confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 
0x55 0x56 0x57


Next adapter: DDC:fb0 #0
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
    (confidence 1, driver `eeprom')
Probing for `DDC monitor'... Success!
    (confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 
0x55 0x56 0x57


Next adapter: SMBus I801 adapter at dcd0
Client found at address 0x30
Client found at address 0x31
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
    (confidence 8, driver `eeprom')
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
    (confidence 8, driver `eeprom')


Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Success... found at address 0x0c30
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Success... found at address 0x0c40
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Success... found at address 0x0c50

Il a chargé plein de modules (et modifié mon /etc/modules) :

# Generated by sensors-detect on Wed Aug 16 14:37:34 2006
# I2C adapter drivers
# modprobe unknown adapter MAVEN:fb0
i2c-matroxfb
i2c-i801
i2c-isa
# I2C chip drivers
# no driver for Philips Semiconductors PCA9556 yet
eeprom
pc87360

Maintenant, lorsque je lance sensors, j'obtiens :

Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!

Or sysfs est bien monté. Quel est le problème ? Manque-t-il encore des
modules ?

--
Frédéric

http://www.gbiloba.org