Re: Install sur vieux portable.

Startseite

Nachricht beantworten
Autor: Colobert Pierre
Datum:  
To: guilde
Betreff: Re: Install sur vieux portable.
Armel a écrit :
> >Config : Versa Note VX (NEC)
> >Celeron 466, Ram 64 Mo , DD 6go
> >USB 1.1, son AC97, écran 800*600
> >Réseau : carte PCMIA 3Com 10/100 ref:3CCFE575CT
> >Lucent Winmodem


> avec 64Mo qd meme.
> il faut mettre un Xfce par exemple et
> usbmount pour avoir les clef usb
> automatiquement (car c'est gnome qui le fait dans ubuntu
> mais là, gnome est trop lourd pour ce genre de machine)


J'ai trouvé une barette de 128Mo suplementaire et c'est bcp mieux car même
avec xfce il utilisait le swap constament, Gnome est devenu utilisable.

pour le lecteur de cartes et le DD usb ils fonctionnent mais j'utilise root
pour monter et demonter. j'ai installé usbmount.

Au demarage du portable j'ai plusieurs messages d'erreurs d'applications (Hal,
udev) qui demandent un noyau 2.6 , est-ce interressant de l'insatller ?, J'ai
actuelement un 2.4.27 et quand je regarde avec synaptic les noyaux en 2.6 il
y en a beaucoup , je ne sais pas le quel prendre, et je cherchais une doc sur
les changements de noyaux .

au niveau des sources d'installation ,
** j'ai voulu utililer netselect pour trouver les mirroirs les plus efficaces
mais je n'ai que des messages d'erreur (mirroir non touvé) même avec ceux de
sources.list qui fonctionnent, je cale!
** De plus je n'ai que main et updates comme sources, quels autres mirroir ?
faut il ajouter .

Je n'ai plus de son , ca a fonctionné pendant 1 journée aprés l'intallation.


Au boot j'ai des message me disant que mon bios est trop vieux pour ACPI mais
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bffbc00 (ACPI data)
BIOS-e820: 000000000bffbc00 - 000000000c000000 (ACPI NVS)
....
ACPI disabled because your bios is from 1999 and too old
You can enable it with acpi=force
Ca vaut le coup de le faire ?

De même
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!

Y a t'il une option à passer à grub pour enlever le test ?

Et voila , Donc le portable avec 192 Mo est assez reactif pour rester en
Debian , mais il y a encore du boulot et je ne sais pas par quel bout
commencer (en plus je suis plus habitué à Mdk et Lilo)

ps.il y a aussi le lucent winmodem mais là j'ai pas encore cherché. ;-p
et en plus je joint le resultat de dmesg pour les courageux qui ont du temps.

--
Pierre
Linux version 2.4.27-2-386 (horms@???) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
 BIOS-e820: 000000000bff0000 - 000000000bffbc00 (ACPI data)
 BIOS-e820: 000000000bffbc00 - 000000000c000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
191MB LOWMEM available.
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 1999 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hda1 ro 
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 467.736 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 933.88 BogoMIPS
Memory: 188424k/196544k available (1069k kernel code, 7732k reserved, 459k data, 96k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7198] at 00:07.0
PCI: Found IRQ 5 for device 00:03.0
PCI: Sharing IRQ 5 with 00:06.0
PCI: Found IRQ 10 for device 00:03.1
PCI: Sharing IRQ 10 with 00:00.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@???)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@???>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk... |?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?\?|?/?-?done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 0
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
hda: HITACHI_DK23AA-60, ATA DISK drive
hdb: CD-224E, ATAPI CD/DVD-ROM drive
blk: queue cc825b60, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [730/255/63] p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 184708k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdb: attached ide-cdrom driver.
hdb: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 00:03.1
PCI: Sharing IRQ 10 with 00:00.1
PCI: Found IRQ 5 for device 00:03.0
PCI: Sharing IRQ 5 with 00:06.0
Yenta ISA IRQ mask 0x0898, PCI irq 10
Socket status: 30000006
Yenta ISA IRQ mask 0x0898, PCI irq 5
Socket status: 30000020
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:52:03 May 16 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:07.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x5ab/0x31) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: WDC WD60  Model: 0AB-00CDB0        Rev: 22.0
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
 /dev/scsi/host1/bus0/target0/lun0: p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
cs: cb_alloc(bus 1): vendor 0x10b7, device 0x5257
PCI: Enabling device 01:00.0 (0000 -> 0003)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400-0x44f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
01:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at 0x4800. Vers LK1.1.18-ac
PCI: Setting latency timer of device 01:00.0 to 64
 00:01:02:7a:96:15, IRQ 5
  product code 5a57 rev 10.0 date 08-29-00
01:00.0: CardBus functions mapped 11000080->cc8e0080
  Internal config register is 80600000, transceivers 0x40.
  8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
  MII transceiver found at address 0, status 7809.
  Enabling bus-master transmits and whole-frame receives.
01:00.0: scatter/gather enabled. h/w checksums enabled
uhci.c: USB Universal Host Controller Interface driver v1.1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
hub.c: new USB device 00:07.2-1, assigned address 3
usb-uhci.c: interrupt, status 2, frame# 120
usb_control/bulk_msg: timeout
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: STORAGE DEVICE    Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
SCSI device sdb: 500400 512-byte hdwr sectors (256 MB)
sdb: test WP failed, assume Write Enabled
 /dev/scsi/host2/bus0/target0/lun0: p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3