Re: recherche le graveur scsi

Page principale

Répondre à ce message
Auteur: alain.morellec
Date:  
À: Herve de Dianous, guilde@imag.fr
Sujet: Re: recherche le graveur scsi
J'ai enlevé la ligne correspondante dans fstab mais cela ne fonctionne
toujours pas.
Vola ce que donne maintenant dmesg:


[alain@localhost alain]$ su
Password:
[root@localhost alain]# dmesg | grep "hd"
Kernel command line: auto BOOT_IMAGE=linux ro root=2201 devfs=mount 
acpi=ht resume=/dev/hdg5 splash=silent
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L120AVV207-0, ATA DISK drive
hdg: WDC AC38400L, ATA DISK drive
hdh: SONY CDU4811, ATAPI CD/DVD-ROM drive
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, 
UDMA(33)
hdg: max request size: 128KiB
hdg: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=16383/16/63, UDMA(33)
Resume Machine: resuming from /dev/hdg5
Resuming from device hdg5
EXT3 FS on hdg1, internal journal
EXT3 FS on hdg6, internal journal
hdh: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)


[root@localhost alain]# dmesg | grep "sc"
vesafb: scrolling: redraw
Using anticipatory io scheduler
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 
6.2.[alain@localhost alain]$ su
Password:
[root@localhost alain]# dmesg | grep "hd"
Kernel command line: auto BOOT_IMAGE=linux ro root=2201 devfs=mount 
acpi=ht resume=/dev/hdg5 splash=silent
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L120AVV207-0, ATA DISK drive
hdg: WDC AC38400L, ATA DISK drive
hdh: SONY CDU4811, ATAPI CD/DVD-ROM drive[alain@localhost alain]$ su
Password:
[root@localhost alain]# dmesg | grep "hd"
Kernel command line: auto BOOT_IMAGE=linux ro root=2201 devfs=mount 
acpi=ht resume=/dev/hdg5 splash=silent
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L120AVV207-0, ATA DISK drive
hdg: WDC AC38400L, ATA DISK drive
hdh: SONY CDU4811, ATAPI CD/DVD-ROM drive
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, 
UDMA(33)
hdg: max request size: 128KiB
hdg: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=16383/16/63, UDMA(33)
Resume Machine: resuming from /dev/hdg5
Resuming from device hdg5
EXT3 FS on hdg1, internal journal
EXT3 FS on hdg6, internal journal
hdh: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
[root@localhost alain]# dmesg | grep "sc"
vesafb: scrolling: redraw
Using anticipatory io scheduler
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
usb 1-1: USB disconnect, address 2
ts: Compaq touchscreen protocol output
  http://www.scyld.com/network/via-rhine.html
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0,  type 5
[root@localhost alain]#
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, 
UDMA(33)
hdg: max request size: 128KiB
hdg: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=16383/16/63, UDMA(33)
Resume Machine: resuming from /dev/hdg5
Resuming from device hdg5
EXT3 FS on hdg1, internal journal
EXT3 FS on hdg6, internal journal
hdh: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)



[root@localhost alain]# dmesg | grep "sc"
vesafb: scrolling: redraw
Using anticipatory io scheduler
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
usb 1-1: USB disconnect, address 2
ts: Compaq touchscreen protocol output
http://www.scyld.com/network/via-rhine.html
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 5
[root@localhost alain]#





36
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
usb 1-1: USB disconnect, address 2
ts: Compaq touchscreen protocol output
http://www.scyld.com/network/via-rhine.html
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 5
[root@localhost alain]#



[alain@localhost alain]$ su
Password:
[root@localhost alain]# dmesg | grep "hd"
Kernel command line: auto BOOT_IMAGE=linux ro root=2201 devfs=mount 
acpi=ht resume=/dev/hdg5 splash=silent
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L120AVV207-0, ATA DISK drive
hdg: WDC AC38400L, ATA DISK drive
hdh: SONY CDU4811, ATAPI CD/DVD-ROM drive[alain@localhost alain]$ su
Password:
[root@localhost alain]# dmesg | grep "hd"
Kernel command line: auto BOOT_IMAGE=linux ro root=2201 devfs=mount 
acpi=ht resume=/dev/hdg5 splash=silent
    ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:DMA
hde: IC35L120AVV207-0, ATA DISK drive
hdg: WDC AC38400L, ATA DISK drive
hdh: SONY CDU4811, ATAPI CD/DVD-ROM drive
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, 
UDMA(33)
hdg: max request size: 128KiB
hdg: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=16383/16/63, UDMA(33)
Resume Machine: resuming from /dev/hdg5
Resuming from device hdg5
EXT3 FS on hdg1, internal journal
EXT3 FS on hdg6, internal journal
hdh: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
[root@localhost alain]# dmesg | grep "sc"
vesafb: scrolling: redraw
Using anticipatory io scheduler
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
usb 1-1: USB disconnect, address 2
ts: Compaq touchscreen protocol output
  http://www.scyld.com/network/via-rhine.html
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0,  type 5
[root@localhost alain]#
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, 
UDMA(33)
hdg: max request size: 128KiB
hdg: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=16383/16/63, UDMA(33)
Resume Machine: resuming from /dev/hdg5
Resuming from device hdg5
EXT3 FS on hdg1, internal journal
EXT3 FS on hdg6, internal journal
hdh: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)



[root@localhost alain]# dmesg | grep "sc"
vesafb: scrolling: redraw
Using anticipatory io scheduler
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
usb 1-1: USB disconnect, address 2
ts: Compaq touchscreen protocol output
http://www.scyld.com/network/via-rhine.html
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 5
[root@localhost alain]#



Herve de Dianous a écrit :

> alain.morellec wrote:
>
>> Les logiciels pour graver ne semblent pas trouver le graveur scsi
>> (bocage du sustème pendant la recherce des périphériques cdrom ide et
>> graveur scsi).
>> Ou est le bug?
>> Si quelqu'un avait une idée cela me permettrais de pouvoir enfin graver.
>>
>> Je suis perdu dans la configuration de fstab!
>> voici son contenu:
>>
>> /dev/hdg1 / ext3 defaults 1 1
>> none /dev/pts devpts mode=0620 0 0
>> /dev/hdg6 /home ext3 defaults 1 2
>> /dev/hdh /mnt/cdrom auto
>> umask=0,user,iocharset=iso8859-15,codepage=850,noauto,ro,exec 0 0
>> /dev/scd0 /mnt/cdrom2 auto
>
>
> ET :
>
> > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
> > Device not ready. Make sure there is a disc in the drive.
> > Device not ready. Make sure there is a disc in the drive.
>
> Montre que l'option "auto" de fstab fait échouer la disponibilité du
> matériel.
> Enlève la ligne correspondante dans fstab
> Comme on te l'a dit, un graveur ne doit pas être monté, ce n'est pas
> un lecteur.
>
> A+ RV2D
>
>