Re: Configuration de xcdroast 0.98

Date :  23/04/03 18:24:59 Paris, Madrid (heure d'été)   
De :    <A HREF="mailto:Alainmorellec">Alainmorellec</A>   
A : <A HREF="mailto:Olivier_Allard-Jacquin@amat.com">Olivier_Allard-Jacquin@???</A> 

>         Bonjour,

>         regarde sur mon site: 
> http://olivieraj.free.fr/fr/linux/information/gravure/index.html

>         J'avais la même configuration que toi, et j'ai fait une petite 
> explication sur le sujet. Ca date un peu, mais tout reste d'actualité !

>                                         Olivier

Linux version 2.4.19-16mdk (quintela@???) (gcc version 3.2 
(Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000006000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
96MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 24576
zone(0): 4096 pages.
zone(1): 20480 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=1601 devfs=mount
No local APIC present or hardware disabled
Initializing CPU#0
Detected 200.456 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.76 BogoMIPS
Memory: 94460k/98304k available (1176k kernel code, 3456k reserved, 444k 
data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0080a135 00000000 00000000, vendor = 1
CPU: After vendor init, caps: 0080a135 00000000 00000000 00000004
CPU:     After generic, caps: 0080a135 00000000 00000000 00000004
CPU:             Common caps: 0080a135 00000000 00000000 00000004
CPU: Cyrix M II 3x Core/Bus Clock stepping 08
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@???)
mtrr: detected mtrr type: Cyrix ARR
PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 00:0d.0
PCI: Cannot allocate resource region 0 of device 00:14.0
PCI: Cannot allocate resource region 1 of device 00:14.0
PCI: Cannot allocate resource region 2 of device 00:14.0
Disabling direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'CMI8330. Audio Adapter'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@???)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 09
PCI: No IRQ known for interrupt pin A of device 00:01.1. Please try using 
pci=biosirq.
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS5597
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC38400L, ATA DISK drive
hdb: SONY CDU4811, ATAPI CD/DVD-ROM drive
hdc: ST32122A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/256KiB Cache, CHS=1027/255/63, UDMA(33)
hdc: 4124736 sectors (2112 MB) w/128KiB Cache, CHS=4092/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
/dev/ide/host0/bus1/target0/lun0:<6> [PTBL] [1023/64/63] p1 p2 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 245k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
PCI: Setting latency timer of device 00:0f.0 to 32
ahc_pci:0:15:0: Host Adapter Bios disabled.  Using default SCSI device 
parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2902/04/10/15/20/30C SCSI adapter>
        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

  Vendor: YAMAHA    Model: CRW8424S          Rev: 1.0d
  Type:   CD-ROM                             ANSI SCSI revision: 02
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:0b.0 to 32
usb-uhci.c: USB UHCI at I/O 0xf780, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,1), internal journal
Adding Swap: 221720k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
es1371: version v0.30 time 18:46:14 Sep 20 2002
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xf700 irq 10
es1371: features: joystick 0x0
PCI: Setting latency timer of device 00:09.0 to 32
ac97_codec: AC97  codec, id: 0x5452:0x4123 (TriTech TR A5)
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
hdb: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
ide-floppy driver 0.99b
udf: registering filesystem
end_request: I/O error, dev 02:00 (floppy), sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
end_request: I/O error, dev 02:00 (floppy), sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
cdrom: open failed.
Device not ready.  Make sure there is a disc in the drive.