Probleme de gravage ....

Startseite

Nachricht beantworten
Autor: Jerome KIEFFER
Datum:  
To: guilde
Betreff: Probleme de gravage ....

Bonjour,
J'ai acheté un graveur en IDE et celui ci me plante les CDs !

J'utilise le module IDE-SCSI du kernel + cdrecord + mkisofs

islay:/home/donkey/temp/CD-TeMP# grave-rep  .       
Cdrecord 1.11a31 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MSI     '
Identifikation : 'CD-RW MS-8340   '
Revision       : '100D'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1806336 = 1764 KB
FIFO size      : 12582912 = 12288 KB
Track 01: data  unknown length
Total size:        0 MB (00:00.00) = 0 sectors
Lout start:        0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
Starting to write CD/DVD at speed 8 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds.  1.42% done,
estimate finish Sat Sep 28 17:52:08 2002                                
         0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
Track 01:    7 MB written (fifo 100%)  8.4x.  2.84% done, estimate
finish Sat Sep 28 18:01:31 2002
Track 01:   17 MB written (fifo 100%)  8.8x.  4.26% done, estimate
finish Sat Sep 28 18:01:08 2002
Track 01:   27 MB written (fifo 100%)  8.3x.cdrecord: Input/output
error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 36 7E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 01 00 02 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x01 Qual 0x00 (no index/sector signal) Fru 0x0
Sense flags: Blk 512 (not valid) 
cmd finished after 0.197s timeout 40s


write track data: error after 28569600 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 120s
Trouble flushing the cache
Writing  time:   30.121s
Fixating...
Fixating time:    4.543s
cdrecord: fifo had 642 puts and 451 gets.
cdrecord: fifo was 0 times empty and 443 times full, min fill was 98%.


QUelqu'un a il déja rencontré ce probleme car sur 3 CD gravé 2 de planté
(un en 16x et l'autre en 8x, sachant que c'est des verbatim 24x ! et le
graveur affiche 40x)

Toute aide serait la bien venue.
--
Jérôme @taz : Morgan 1200 + 512Mo DDR in a 10L SS40G
"Windows 95 is a 32-bit shell for a 16-bit extension to an 8-bit
operating system designed for a 4-bit microprocessor by a 2-bit company
that can't stand one bit of competition."