Salut
oui, j'ai oublier de dire, j'ai bien la ligne append="hda=ide-scsi" dans mon lilo.conf
Je me répète un peux, même machine avec Redhat 7.3 j'arrive a graver. Même machine
même distrib, avec un noyau 2.2.17, le 'cdrecord -scanbus' me trouve le graveur.
C'est peut-être le noyau qui as un problème, mais dans ce cas je pense que ça se saurait.
A plus
Dominique
$dmesg
Linux version 2.4.17-386 (herbert@gondolin) (gcc version 2.95.4 20011006 (Debian
prerelease)) #2 Sat Dec 22 21:55:21 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=debi ro root=814 hda=ide-scsi
Initializing CPU#0
Detected 1059.468 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2110.25 BogoMIPS
Memory: 252788k/262064k available (892k kernel code, 8888k reserved, 235k data,
192k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(TM) XP1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0df0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/3074] at 00:11.0PCI: Found IRQ 11 for device 00:11.1
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 01:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.7 (20011216) Richard Gooch (rgooch@???)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
RQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3204 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3204k freed
VFS: Mounted root (cramfs filesystem).
Journalled Block Device driver loaded
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:11.1
PCI: Sharing IRQ 11 with 01:00.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 63, 16bit)
Vendor: IBM Model: DNES-309170W Rev: SAH0
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:A:2): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
scsi0:A:0:0: Tagged Queuing enabled. Depth 8
scsi0:A:1:0: Tagged Queuing enabled. Depth 8
scsi0:A:2:0: Tagged Queuing enabled. Depth 8
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: Found IRQ 11 for device 00:11.1
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 01:00.0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p4
SCSI device sdc: 8467200 512-byte hdwr sectors (4335 MB)
/dev/scsi/host0/bus0/target2/lun0: p1 p2
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 192k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 136512k swap-space (priority -1)
Real Time Clock Driver v1.10e
NTFS driver v1.1.21 [Flags: R/O MODULE]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
AWE32: No ISAPnP cards found
AWE32: not detected
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/driv
ers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
PCI: Found IRQ 10 for device 00:0e.0
PCI: Sharing IRQ 10 with 00:05.0
eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:D0:B7:13:EC:A4, IRQ 10.
Board assembly 721383-008, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 32M @ 0xfc000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xfc000000 32MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
ip_tables: (c)2000 Netfilter core team
ip_conntrack (2047 buckets, 16376 max)
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266]
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:0c.0
PCI: Sharing IRQ 9 with 00:11.2
PCI: Sharing IRQ 9 with 00:11.3
PCI: Sharing IRQ 9 with 00:11.4
bttv0: Bt848 (rev 18) at 00:0c.0, irq: 9, latency: 32, memory: 0xfa000000
bttv0: using: BT848A(MIRO PCTV) [card=1,insmod option]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=9 tuner=3 radio=no stereo=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,
tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
bttv0: i2c attach [client=Philips SECAM,ok]
i2c-core.o: client [Philips SECAM] registered to adapter [bt848 #0](pos. 0).
cmpci: version $Revision: 5.64 $ time 16:29:43 Dec 22 2001
PCI: Found IRQ 10 for device 00:05.0
PCI: Sharing IRQ 10 with 00:0e.0
cmpci: found CM8738 adapter at io 0xd800 irq 10
cmpci: chip version = 055
loop: loaded (max 8 devices)
inserting floppy driver for 2.4.17-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
eth0: 0 multicast blocks dropped.
lp0: compatibility mode
