La distrib est fli4l (
http://www.fli4l.org/ ) .
Mon fichier de conf est en piece jointe.
J'utilise un modem ethernet (pas de port usb sur mon pentium 120 :(
Un petit utilitaire fonctionnant sous windows te permet de controler ton
firewall a distance, tu peux visualiser en temps reel la bande passante
utilisée, modifier les regles de filtrage, redemarrer le firewall etc etc ...
Ika
Selon Cyrille CLARISSE <cyrille.clarisse@???>:
> Je serai intéressé de connaitre la distrib supportant l'ADSL et un FW, le
> tout sur
> une disquette ! Peux-tu nous en dire plus ? Et même éventuellement
> communiquer ton
> exemple de conf...
> Merci !
>
> Cyrille
>
>
#------------------------------------------------------------------------------
# config.txt - fli4l configuration parameters V1.6.3
#
# You can edit/change this file with fliwiz V1.6 or any text editor.
#
# P L E A S E R E A D T H E D O C U M E N T A T I O N ,
# S E E R E A D M E . T X T
#
# B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N
# L E S E N , S I E H E R E A D M E . T X T
#
# Creation: 13.04.2000 fm
# Last Update: 02.10.2001 fm
#
# Copyright (c) 2000-2001 Frank Meyer <frank@???>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# General settings:
#------------------------------------------------------------------------------
HOSTNAME='firewall' # name of fli4l router
PASSWORD='mon_passwd' # password for telnetd, ftpd, sshd, and samba
MOUNT_BOOT='rw' # mount boot device (floppy): ro, rw, no
#------------------------------------------------------------------------------
# Ethernet card drivers:
# uncomment your ethernet card
#------------------------------------------------------------------------------
ETH_DRV_N='1' # number of ethernet drivers to load, usually 1
ETH_DRV_1='rtl8139' # PCI: RealTek 8129/8139 (not 8019/8029!) PCI
ETH_DRV_1_OPTION='' # additional option, e.g. 'io=0x340' for ne
#------------------------------------------------------------------------------
# Ether networks used with IP protocol:
#------------------------------------------------------------------------------
IP_ETH_N='2' # number of ip ethernet networks, usually 1
IP_ETH_1_NAME='' # optional: other device name than ethX
IP_ETH_1_IPADDR='0.0.0.0' # IP address of your n'th ethernet card
IP_ETH_1_NETWORK='0.0.0.0' # network of your LAN
IP_ETH_1_NETMASK='255.255.255.255' # netmask of your LAN
IP_ETH_2_NAME='' # optional: other device name than ethX
IP_ETH_2_IPADDR='10.0.0.1' # IP address of your n'th ethernet card
IP_ETH_2_NETWORK='10.0.0.0' # network of your LAN
IP_ETH_2_NETMASK='255.0.0.0' # netmask of your LAN
#------------------------------------------------------------------------------
# Additional routes, optional
#------------------------------------------------------------------------------
IP_DEFAULT_GATEWAY='' # normally not used, read documentation!
IP_ROUTE_N='0' # number of additional routes
IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway
#------------------------------------------------------------------------------
# Masquerading:
#------------------------------------------------------------------------------
MASQ_NETWORK='10.0.0.0/8' # networks to masquerade (e.g. our LAN)
MASQ_MODULE_N='2' # load n masq modules (default: only ftp)
MASQ_MODULE_1='ftp' # ftp
MASQ_MODULE_2='h323' # h323 (netmeeting)
MASQ_MODULE_3='icq' # icq (use with caution!)
MASQ_MODULE_4='irc' # irc
MASQ_MODULE_5='raudio' # raudio
MASQ_MODULE_6='vdolive' # vdolive
MASQ_MODULE_7='quake' # quake
MASQ_MODULE_8='cuseeme' # cuseeme
MASQ_MODULE_9='mms' # MSN filetransfer
MASQ_MODULE_10='pptp' # pptp
MASQ_MODULE_11='ipsec' # ipsec
MASQ_MODULE_12='dplay' # dplay (direct play)
MASQ_MODULE_13='msn-0.02' # msn zone (use version 0.01 or 0.02)
MASQ_MODULE_14='udp_dloose' # pseudo mod: some internet games need it
#------------------------------------------------------------------------------
# Routing without masquerading
#------------------------------------------------------------------------------
ROUTE_NETWORK='' # optional: route from/to network, no masq
#------------------------------------------------------------------------------
# Routing: internal hosts to deny forwarding
#------------------------------------------------------------------------------
FORWARD_DENY_HOST_N='0' # number of denied hosts
FORWARD_DENY_HOST_1='192.168.6.5' # optional: 1st denied host
FORWARD_DENY_HOST_2='192.168.6.6' # optional: 2nd denied host
#------------------------------------------------------------------------------
# Routing: ports to reject/deny forwarding (from inside and outside!)
#------------------------------------------------------------------------------
FORWARD_DENY_PORT_N='1' # no. of ports to reject/deny forwarding
FORWARD_DENY_PORT_1='137:139 REJECT' # deny/reject forwarding of netbios
#------------------------------------------------------------------------------
# Firewall: ports to reject/deny from outside (all served ports)
#
# here we leave two ports untouched:
#
#------------------------------------------------------------------------------
FIREWALL_DENY_PORT_N='1' # no. of ports to reject/deny
FIREWALL_DENY_PORT_1='2000:2001 REJECT' # imond/telmond ports: reject or deny
FIREWALL_DENY_PORT_2='0:53 REJECT' # privileged ports: reject or deny
FIREWALL_DENY_PORT_3='54:113 REJECT' # privileged ports: reject or deny
FIREWALL_DENY_PORT_4='114:1023 REJECT' # privileged ports: reject or deny
FIREWALL_DENY_PORT_5='8000 REJECT' # proxy access: reject or deny
FIREWALL_DENY_PORT_6='20012 REJECT' # vbox server access: reject or deny
FIREWALL_DENY_ICMP='no' # deny icmp (ping): yes or no
FIREWALL_LOG='no' # log access to rejected/denied ports
#------------------------------------------------------------------------------
# Domain configuration:
#------------------------------------------------------------------------------
START_DNS='no' # start dns server: yes or no
DNS_FORWARDERS='192.76.144.66' # DNS servers of your provider, e.g. MSN
DNS_VERBOSE='no' # log queries in /usr/local/ens/ens.log
DOMAIN_NAME='domain.de' # your domain name
DNS_FORBIDDEN_N='0' # number of forbidden domains
DNS_FORBIDDEN_1='foo.bar' # 1st forbidden domain
DNS_FORBIDDEN_2='bar.foo' # 2nd forbidden domain
HOSTS_N='4' # number of hosts in your domain
HOST_1='192.168.6.1 fli4l' # 1st host: ip and name
HOST_2='192.168.6.2 client2' # 2nd host: ip and name
HOST_3='192.168.6.3 client3' # 3rd host: ip and name
HOST_4='192.168.6.4 client4' # 4th host: ip and name
#------------------------------------------------------------------------------
# Special DNS configuration
#------------------------------------------------------------------------------
DNS_N='1' # number of special dns servers, normally 0
DNS_1='193.252.19.4' # 1st special dns server
DNS_2='193.252.19.3' # 2nd special dns server
#DNS_2='lan.firma.de 192.168.2.12' # 2nd special dns server for lan.firma.de
#------------------------------------------------------------------------------
# imond configuration:
#------------------------------------------------------------------------------
START_IMOND='yes' # start imond: yes or no
IMOND_PORT='2000' # TCP-Port, see also FIREWALL_DENY_PORT_x!
IMOND_PASS='passwd1' # imond-password, may be empty
IMOND_ADMIN_PASS='passwd1' # imond-admin-password, may be empty
IMOND_LED='' # tty for led: com1 - com4 or empty
IMOND_BEEP='yes' # beep if connection going up/down
IMOND_LOG='no' # log /var/log/imond.log: yes or no
IMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log
IMOND_ENABLE='yes' # accept "enable/disable" commands
IMOND_DIAL='yes' # accept "dial/hangup" commands
IMOND_ROUTE='yes' # accept "route" command
IMOND_REBOOT='yes' # accept "reboot" command
#------------------------------------------------------------------------------
# Generic circuit configuration:
#------------------------------------------------------------------------------
IP_DYN_ADDR='yes' # use dyn. ip addresses (most providers do)
DIALMODE='auto' # standard dialmode: auto, manual, or off
#------------------------------------------------------------------------------
# Optional package: ISDN
#------------------------------------------------------------------------------
OPT_ISDN='no' # use ISDN: yes or no
ISDN_TYPE='3' # type, e.g. Teles 16.3 ISA
ISDN_IO='0xd80' # io, e.g. 0xd80 for Teles 16.3 ISA
ISDN_IO0='' # io0
ISDN_IO1='' # io1
ISDN_MEM='' # mem
ISDN_IRQ='12' # irq, e.g. 12 for Teles 16.3 ISA
ISDN_DEBUG_LEVEL='31' # debug level (hisax driver)
ISDN_VERBOSE_LEVEL='2' # verbose level
#----------------------------------------------------------------------------
# ISDN Circuits:
#----------------------------------------------------------------------------
ISDN_CIRCUITS_N='2' # number of ISDN circuits, DSL: see below!
#----------------------------------------------------------------------------
# Circuit 1: Internet-By-Call-Provider Planet-Interkom
#----------------------------------------------------------------------------
ISDN_CIRC_1_NAME='Planet-Interkom' # circuit Planet-Interkom
ISDN_CIRC_1_TYPE='ppp' # circuit uses sync ppp (ipppd)
ISDN_CIRC_1_BUNDLING='no' # channel bundling: yes or no
ISDN_CIRC_1_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand
ISDN_CIRC_1_LOCAL='' # local ip address of your ISDN card - dummy
ISDN_CIRC_1_REMOTE='' # remote ip address (ISDN) - dummy
ISDN_CIRC_1_NETMASK='255.255.255.0' # netmask (ISDN) - dummy
ISDN_CIRC_1_MTU='1024' # maximum transmission unit
ISDN_CIRC_1_MRU='1524' # maximum receive unit
ISDN_CIRC_1_COMPRESSION='no' # compress headers if ppp: 'yes' or 'no'
ISDN_CIRC_1_IPX_NETWORK='' # optional: ipx network
ISDN_CIRC_1_IPX_NODE='' # optional: ipx nodes local:remote
ISDN_CIRC_1_REMOTENAME='' # optional: remote hostname for dialin
ISDN_CIRC_1_USER='anonymer' # User-ID to login into provider's gateway
ISDN_CIRC_1_PASS='surfer' # Password for login
ISDN_CIRC_1_ROUTE='0.0.0.0' # this is the default route
ISDN_CIRC_1_DIALOUT='010900191799' # dialout: ISDN number of provider
ISDN_CIRC_1_DIALIN='' # dialin: no dialin
ISDN_CIRC_1_CALLBACK='off' # callback mode: 'in', 'out', or 'off'
ISDN_CIRC_1_CBDELAY='3' # callback delay, only used for callbacks
ISDN_CIRC_1_EAZ='81330' # Your MSN (without area code)
ISDN_CIRC_1_DEBUG='yes' # enable ipppd debugging, 'yes' or 'no'
ISDN_CIRC_1_AUTH='' # require the peer to authenticate itself
ISDN_CIRC_1_HUP_TIMEOUT='45' # Hangup after 45 seconds idle time
ISDN_CIRC_1_CHARGEINT='1' # Value of charge interval (in seconds)
ISDN_CIRC_1_TIMES='Mo-Fr:08-18:0.032:Y Mo-Fr:18-08:0.025:Y Sa-Su:00-24:0.025:Y'
# times/charges when LCR
#----------------------------------------------------------------------------
# Circuit 2: Internet-By-Call-Provider MSN
#----------------------------------------------------------------------------
ISDN_CIRC_2_NAME='msn' # circuit MSN
ISDN_CIRC_2_TYPE='ppp' # circuit uses sync ppp (ipppd)
ISDN_CIRC_2_BUNDLING='no' # channel bundling: yes or no
ISDN_CIRC_2_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand
ISDN_CIRC_2_LOCAL='' # local ip address of your ISDN card - dummy
ISDN_CIRC_2_REMOTE='' # remote ip address (ISDN) - dummy
ISDN_CIRC_2_NETMASK='255.255.255.0' # netmask (ISDN) - dummy
ISDN_CIRC_2_MTU='1024' # maximum transmission unit
ISDN_CIRC_2_MRU='1524' # maximum receive unit
ISDN_CIRC_2_COMPRESSION='no' # compress headers if ppp: 'yes' or 'no'
ISDN_CIRC_2_IPX_NETWORK='' # optional: ipx network
ISDN_CIRC_2_IPX_NODE='' # optional: ipx nodes local:remote
ISDN_CIRC_2_REMOTENAME='' # optional: remote hostname for dialin
ISDN_CIRC_2_USER='msn' # User-ID to login into provider's gateway
ISDN_CIRC_2_PASS='msn' # Password for login
ISDN_CIRC_2_ROUTE='0.0.0.0' # this is the default route
ISDN_CIRC_2_DIALOUT='0192658' # dialout: ISDN number of provider
ISDN_CIRC_2_DIALIN='' # dialin: no dialin
ISDN_CIRC_2_CALLBACK='off' # callback mode: 'in', 'out', or 'off'
ISDN_CIRC_2_CBDELAY='3' # callback delay, only used for callbacks
ISDN_CIRC_2_EAZ='81330' # Your MSN (without area code)
ISDN_CIRC_2_DEBUG='yes' # enable ipppd debugging, 'yes' or 'no'
ISDN_CIRC_2_AUTH='' # require the peer to authenticate itself
ISDN_CIRC_2_HUP_TIMEOUT='45' # Hangup after 45 seconds idle time
ISDN_CIRC_2_CHARGEINT='1' # Value of charge interval (in seconds)
ISDN_CIRC_2_TIMES='Mo-Su:00-24:0.029:N'
# times/charges when LCR
#------------------------------------------------------------------------------
# Circuit 3: bidirectional connection to another router with raw tcpip
# not activated yet, only example for non-default-circuit
#------------------------------------------------------------------------------
ISDN_CIRC_3_NAME='Firma' # circuit name, e.g. 'Firma'
ISDN_CIRC_3_TYPE='raw' # circuit uses raw tcp/ip
ISDN_CIRC_3_BUNDLING='no' # channel bundling: yes or no
ISDN_CIRC_3_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand
ISDN_CIRC_3_LOCAL='192.168.120.8' # local ip address of this circuit
ISDN_CIRC_3_REMOTE='192.168.120.7' # remote ip address of this circuit
ISDN_CIRC_3_NETMASK='255.255.255.0' # netmask of this circuit
ISDN_CIRC_3_MTU='1024' # maximum transmission unit
ISDN_CIRC_3_MRU='1524' # maximum receive unit
ISDN_CIRC_3_COMPRESSION='no' # compress headers if ppp: 'yes' or 'no'
ISDN_CIRC_3_IPX_NETWORK='' # optional: ipx network
ISDN_CIRC_3_IPX_NODE='' # optional: ipx nodes local:remote
ISDN_CIRC_3_REMOTENAME='' # optional: remote hostname for dialin
ISDN_CIRC_3_USER='' # user-id not used if raw connection
ISDN_CIRC_3_PASS='' # password not used if raw connection
ISDN_CIRC_3_ROUTE='192.168.1.0' # remote net to reach over this circuit
ISDN_CIRC_3_DIALOUT='0221xxxxxx' # dialout no. of remote router
ISDN_CIRC_3_DIALIN='221xxxxxx' # dialin no. with area code, but no leading '0'
ISDN_CIRC_3_CALLBACK='off' # callback mode: 'in', 'out', or 'off'
ISDN_CIRC_3_CBDELAY='3' # callback delay, only used for callbacks
ISDN_CIRC_3_EAZ='81330' # Your MSN (without area code)
ISDN_CIRC_3_DEBUG='no' # ever no if raw-ip connection
ISDN_CIRC_3_AUTH='' # not needed if raw-ip connection
ISDN_CIRC_3_HUP_TIMEOUT='45' # Hangup after XX seconds idle time
ISDN_CIRC_3_CHARGEINT='90' # Value of charge interval (in seconds)
ISDN_CIRC_3_TIMES='Mo-Fr:09-18:0.08:N Mo-Fr:18-09:0.03:N Sa-Su:00-24:0.03:N'
# times/charges when LCR
#------------------------------------------------------------------------------
# Optional package: PPPoE
#------------------------------------------------------------------------------
OPT_PPPOE='yes' # use ppp over ethernet: yes or no
PPPOE_NAME='DSL' # circuit name, don't write spaces
PPPOE_ETH='eth0' # eth card connected to ADSL modem, e.g. 2nd
PPPOE_USER='loginwanadoo' # username
PPPOE_PASS='passwanadoo' # password
PPPOE_DEBUG='no' # enable pppd debugging, 'yes' or 'no'
PPPOE_HUP_TIMEOUT='1800' # idle time after which to hangup
PPPOE_SYNCHRONOUS='no' # synchronous ppp: yes or no
PPPOE_CHARGEINT='60' # value of charge interval (in seconds)
PPPOE_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR
#------------------------------------------------------------------------------
# Optional package: PPTP - DSL in Austria/Netherlands
#------------------------------------------------------------------------------
OPT_PPTP='no' # use PPP over ethernet: yes or no
PPTP_ETH='eth1' # ethernet card connected to ADSL modem
PPTP_USER='anonymer' # username
PPTP_PASS='surfer' # password
PPTP_DEBUG='no' # enable pppd debugging, 'yes' or 'no'
PPTP_HUP_TIMEOUT='600' # idle time after which to hangup
PPTP_MODEM_TYPE='bcaa' # 2 different types in Austria: 'bbaa' / 'bcaa'
# in the Netherlands use 'mxstream'
#------------------------------------------------------------------------------
# Optional package: HTTP-Server for Monitoring
#------------------------------------------------------------------------------
OPT_HTTPD='no' # install mini web server: yes or no
HTTPD_PORT='80' # http port, see also FIREWALL_DENY_PORT_x !
HTTPD_USER_N='1' # Numbers of users for the HTTPD-server
HTTPD_USER_1='admin' # Name of the 1st user
HTTPD_PASS_1='fli4l' # Password of the 1st user
HTTPD_RIGHTS_1='all' # Rights of the 1st user
#----------------------------------------------------------------------------
# optional package: PPPoE-Status
#----------------------------------------------------------------------------
OPT_POESTATUS='yes' # show pppoe status on console #3
#------------------------------------------------------------------------------
# optional package: syslogd
#------------------------------------------------------------------------------
OPT_SYSLOGD='no' # start syslogd: yes or no
SYSLOGD_DEST='/dev/console' # destination of syslog messages
#------------------------------------------------------------------------------
# optional package: klogd
#------------------------------------------------------------------------------
OPT_KLOGD='no' # start klogd: yes or no
#------------------------------------------------------------------------------
# telmond configuration:
#------------------------------------------------------------------------------
OPT_TELMOND='no' # start telmond: yes or no
TELMOND_PORT='5001' # TCP-Port, see also FIREWALL_DENY_PORT_x!
TELMOND_LOG='no' # log /var/log/telmond.log: yes or no
TELMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log
TELMOND_MSN_N='0' # number of msn->ip mapping entries
TELMOND_MSN_1='80 10.0.0.2' # e.g. map MSN 80 to client 10.0.0.2
TELMOND_CMD_N='0' # no. of commands to be executed if call-in
TELMOND_CMD_1='123 * sleep 5; imonc dial' # e.g. dial out via default circuit
#------------------------------------------------------------------------------
# Optional package: tools
#------------------------------------------------------------------------------
OPT_TOOLS='no' # install additional tools: yes or no
#------------------------------------------------------------------------------
# Optional package: wget
#------------------------------------------------------------------------------
OPT_WGET='no' # install wget, see howto on www.fli4l.de
#------------------------------------------------------------------------------
# Optional package: PNP
#------------------------------------------------------------------------------
OPT_PNP='no' # install isapnp tools: yes or no
#------------------------------------------------------------------------------
# Optional package: SERIAL
#------------------------------------------------------------------------------
OPT_SERIAL='no' # install stty and setserial: yes or no
#------------------------------------------------------------------------------
# Optional package: RESCUE
#------------------------------------------------------------------------------
OPT_RESCUE='no' # install e2fsck
#------------------------------------------------------------------------------
# Optional package: TELNETD
#------------------------------------------------------------------------------
OPT_TELNETD='no' # install telnetd: yes or no
#------------------------------------------------------------------------------
# Optional package: SSHD (secure shell)
#------------------------------------------------------------------------------
OPT_SSHD='no' # install sshd: yes or no
#------------------------------------------------------------------------------
# Optional package: FTPD
#------------------------------------------------------------------------------
OPT_FTPD='no' # install ftpd: yes or no
FTPD_PORT='21' # ftp port, see also FIREWALL_DENY_PORT_x !
#------------------------------------------------------------------------------
# Optional package: LCD
#------------------------------------------------------------------------------
OPT_LCD='no' # install lcd driver and tools: yes or no
LCD_COLS='20' # no. of lcd columns (16,20,32,40) dflt: 20
LCD_LINES='4' # no. of lcd lines (1,2,4) dflt: 4
LCD_ADDRESS='0x0378' # IO address of used lpt port, or 'comX'
LCD_TIME_LONG='' # long delay time (empty = default: 100)
LCD_TIME_SHORT='' # short delay time (empty = default: 40)
LCD_OPTION='' # set 'a_type=1', if you have a HD66712 chip
LCD_START_ISDN_RATE='yes' # isdn/dsl rating display on lcd: yes or no
LCD_TYPE_N='10' # no. of data types to show, see docum.
LCD_TYPE_1='39 0 1 IP:' # Text
LCD_TYPE_2='25 4 1' # dsl ip address
LCD_TYPE_3='39 0 2 IN:' # Text
LCD_TYPE_4='18 3 2' # dsl input rate
LCD_TYPE_5='39 11 2 OUT:' # Text
LCD_TYPE_6='19 15 2' # dsl output rate
LCD_TYPE_7='39 0 3 >' # Text
LCD_TYPE_8='34 1 3' # dsl quantity in
LCD_TYPE_9='39 11 3 <' # Text
LCD_TYPE_10='37 12 3' # dsl quantity out
LCD_TYPE_ONLINE_N='3' # no. of data types to show if online
LCD_TYPE_ONLINE_1=' 8 0 0' # dsl status
LCD_TYPE_ONLINE_2='39 7 0 :' # Text
LCD_TYPE_ONLINE_3='31 9 0' # dsl online time
LCD_TYPE_OFFLINE_N='2' # no. of data types to show if offline
LCD_TYPE_OFFLINE_1=' 0 0 0' # local date
LCD_TYPE_OFFLINE_2=' 2 12 0' # local time
LCD_VAR_TEXT_1='Text1' # Default-Text 1 -> /etc/lcd_text1.txt
LCD_VAR_TEXT_2='Text2' # Default-Text 2 -> /etc/lcd_text2.txt
LCD_VAR_TEXT_3='Text3' # Default-Text 3 -> /etc/lcd_text3.txt
LCD_VAR_TEXT_4='Text4' # Default-Text 4 -> /etc/lcd_text4.txt
#------------------------------------------------------------------------------
# Optional package: PPP
#------------------------------------------------------------------------------
OPT_PPP='no' # install serial ppp package
PPP_DEV='com1' # COM port - empty, com1 or com2
PPP_SPEED='38400' # COM port speed
PPP_IPADDR='192.168.4.1' # IP address of fli4l router (COMx)
PPP_PEER='192.168.4.2' # IP address of peer (pointopoint)
PPP_NETWORK='192.168.4.0' # network
#------------------------------------------------------------------------------
# Optional package: IPX network protocol
#------------------------------------------------------------------------------
OPT_IPX='no' # use ipx: yes or no
IPX_INTERNAL_NET='0x0ABCDEF0' # internal network
IPX_NODE='1' # node
IPX_INTERFACE='eth0' # ethernet interface used for IPX
IPX_FRAME='802.2' # frame type: 802.2,802.3,ether_ii,AUTO
IPX_NETWORK='0x0ABCDEF1' # network
#------------------------------------------------------------------------------
# Optional package: IMODEM
#------------------------------------------------------------------------------
OPT_IMODEM='no' # install isdn modem emulator: yes or no
IMODEM_MSN='81330' # isdn modem emulator: your msn
IMODEM_SERIAL='com1' # isdn modem emulator: COM port
IMODEM_SPEED='115200' # isdn modem emulator: COM speed
#------------------------------------------------------------------------------
# Optional package: LPD
# !!! Attention !!! Printer-Queue-Names changed, please read the manual !
# !!! Attention !!! LPD_PORT_x changed, please read the manual !
#------------------------------------------------------------------------------
OPT_LPD='no' # install lpd: yes or no
LPD_PORT_N='1' # how many ports for printing are used
LPD_PORT_1='0x378' # io-adress for printer on 1st port: 0x3bc,0x378 or 0x278
LPD_RAM='4096' # use 4 MB RAM (4096 KB) for printer queues
#------------------------------------------------------------------------------
# Optional package: SAMBA
# (if you want to print over samba, also OPT_LPD must be set to 'yes')
#------------------------------------------------------------------------------
OPT_SAMBA='no' # install samba: yes or no
SAMBA_WORKGROUP='workgroup' # workgroup name of windows-clients
SAMBA_ADMINIP='' # ip addr of smb-client (mount fli4l rootfs)
SAMBA_LPNET_1='' # allowed networks for LPD_PORT_1, if empty all internal nets
SAMBA_TIMESERVER='no' # smb-timeserver for win-clients: yes or no
#------------------------------------------------------------------------------
# Optional package: NMBD
#------------------------------------------------------------------------------
OPT_NMBD='no' # install nmbd as SMB Nameserver
NMBD_MASTERBROWSER='no' # act as a masterbrowser: yes or no
NMBD_WINSSERVER='no' # act as an WINS-Server: yes or no
NMBD_WINSCLIENT='no' # act as an WINS-Client: yes or no
NMBD_EXTWINSIP='' # IP address of the external WINS-Server
NMBD_WINSPROXY='no' # act as an WINS-Proxy : yes or no
#------------------------------------------------------------------------------
# Optional package: PORTFW
#
# If you set OPT_PORTFW='yes', you have to edit opt/usr/local/bin/portfw.sh
#------------------------------------------------------------------------------
OPT_PORTFW='yes' # install port forwarding tools/modules
#------------------------------------------------------------------------------
# optional package: y2k correction
#------------------------------------------------------------------------------
OPT_Y2K='no' # y2k correction: yes or no
Y2K_DAYS='' # correct hardware Y2K-Bug: add x days
#------------------------------------------------------------------------------
# Optional package: TIME
#------------------------------------------------------------------------------
OPT_TIME='no' # install time zone informations: yes or no
TIME_ZONE='MET' # timezone: MET or GMT
TIME_SERVICE='no' # enable "time" service (port 37): yes or no
TIME_SERVER='ptbtime1.ptb.de' # name of time server, may be empty
TIME_ACCESS_AT_BOOT_TIME='no' # access time server at boot time: yes or no
TIME_CIRCUITS='1 2 3' # circuit indices when to activate time sync
#------------------------------------------------------------------------------
# Optional package: DHCP
#------------------------------------------------------------------------------
OPT_DHCP='no' # install DHCP server: yes or no
DHCP_LS_TIME_DYN='3600' # default time for dynamic leases: 1 hour
DHCP_MAX_LS_TIME_DYN='7200' # max time for dynamic leases: 2 hours
DHCP_LS_TIME_FIX='86400' # default time for fix leases: 1 day
DHCP_MAX_LS_TIME_FIX='604800' # max time for fix leases: 1 week
DHCP_RANGE_1='192.168.6.2 192.168.6.100' # range of n'th ethnet, see ETH_N !
#------------------------------------------------------------------------------
# Optional: mount additional devices
#------------------------------------------------------------------------------
OPT_MOUNT='no' # mount disks or cdroms: yes or no
MOUNT_N='1' # number of mounts
MOUNT_1_DEV='/dev/hda1' # example: 1st partition of first hard disk
MOUNT_1_POINT='/hd' # mount point, here: /hd
MOUNT_1_FS='vfat' # filesystem type: fat, vfat, or ext2
MOUNT_1_OPTION='ro' # additional options, see documentation!
#------------------------------------------------------------------------------
# Optional package: CDROM (only for ide, scsi see below)
#------------------------------------------------------------------------------
OPT_CDROM='no' # install IDE CDROM drivers: yes or no
#------------------------------------------------------------------------------
# Optional package: SCSI drivers
#------------------------------------------------------------------------------
OPT_SCSI='no' # install SCSI drivers: yes or no
SCSI_DRV_N='1' # number of SCSI drivers, '2' means: with cdrom
SCSI_DRV_1='aha1542' # Adaptec AHA154x Controller
#SCSI_DRV_1='sym53c8xx' # All Adapter with Symbios Logic (LSI) Chips 53c8xx
#SCSI_DRV_1='wd7000' # Western Digital 7000 SCSI host adapter
#SCSI_DRV_1='ultrastor' # UltraStor 14F, 24F and 34F SCSI-2 host adapter
#SCSI_DRV_1='u14-34f' # UltraStor 14F and 34F SCSI-2 host adapters
#SCSI_DRV_1='tmscsim' # tmscsim
#SCSI_DRV_1='t128' # Trantor T128/T128F/T228 SCSI host adapters
#SCSI_DRV_1='sym53c416' # sym53c416 SCSI host adapter
#SCSI_DRV_1='sim710' # sim710
#SCSI_DRV_1='seagate' # 8-bit SCSI controllers
#SCSI_DRV_1='qlogicisp' # all QLogic PCI SCSI host adapters
#SCSI_DRV_1='qlogicfc' # QLogic ISP2100 SCSI-FCP host adapter
#SCSI_DRV_1='qlogicfas' # adapters based on the FASXX chip
#SCSI_DRV_1='psi240i' # PSI240i EIDE interface card
#SCSI_DRV_1='pci2220i' # PCI2220i EIDE interface card
#SCSI_DRV_1='pci2000' # PCI2000I EIDE interface card
#SCSI_DRV_1='pas16' # pas16 chip based cards
#SCSI_DRV_1='ncr53c8xx' # NCR53C8XX family of PCI-SCSI controllers
#SCSI_DRV_1='ncr53c406a' # NCR53c406a SCSI host adapter
#SCSI_DRV_1='megaraid' # AMI MegaRAID 418, 428, 438, 466, 762, 490 and 467 SCSI host adapters
#SCSI_DRV_1='ips' # IBM ServeRAID hardware RAID controllers
#SCSI_DRV_1='initio' # Initio 91XXU(W) SCSI host adapter
#SCSI_DRV_1='in2000' # ISA bus SCSI host adapter
#SCSI_DRV_1='gdth' # gdth family
#SCSI_DRV_1='g_ncr5380' # generic NCR family of SCSI controllers
#SCSI_DRV_1='fdomain' # Future Domain's 16-bit SCSI host adapters, incl. AHA2920A
#SCSI_DRV_1='eata' # support for the EATA-DMA protocol compliant SCSI Host Adapters
#SCSI_DRV_1='dtc' # DTC 3180/3280 SCSI Host Adapters
#SCSI_DRV_1='buslogic' # BusLogic MultiMaster and FlashPoint SCSI Host Adapters
#SCSI_DRV_1='atp870u' # adapters with atp870u
#SCSI_DRV_1='am53c974' # AM53/79C974 SCSI host adapters
#SCSI_DRV_1='aic7xxx' # various aic7xxx based Adaptec SCSI controllers *not* AHA2920
#SCSI_DRV_1='aha1740' # driver for AHA-1740
#SCSI_DRV_1='aha152x' # driver for AHA-1510, AHA-1520, AHA-1522, and AHA-2825
#SCSI_DRV_1='advansys' # all adapters manufactered by advansys
#SCSI_DRV_1='a100u2w' # Initio INI-A100U2W SCSI host adapter
#SCSI_DRV_1='53c78xx' # 53c7 and 8xx NCR family of SCSI controllers
SCSI_DRV_1_OPTION='' # enter driver option here, optional!
SCSI_DRV_2='cdrom' # SCSI CDROM driver
SCSI_DRV_2_OPTION='' # enter cdrom driver option here, not used yet
#------------------------------------------------------------------------------
# Optional package: PCMCIA support:
#------------------------------------------------------------------------------
OPT_PCMCIA='no' # pcmcia cards used: yes or no
PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or 'tcic'
PCMCIA_PCIC_OPTS='' # option for socket driver, usually empty
PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually empty
PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager, usually empty
#------------------------------------------------------------------------------
# Optional package: PROXY (junkbuster)
#------------------------------------------------------------------------------
OPT_PROXY='no' # proxy junkbuster: yes or no
PROXY_ACCESS='192.168.6.0/24' # proxy: permit access from lans x.x.x.x/nn ...
PROXY_PORT='8000' # proxy: listen port, s. FIREWALL_DENY_PORT_x !
PROXY_FORWARD='' # proxy: optional forward-host:forward-port
#------------------------------------------------------------------------------
# Optional package: VBOX
#------------------------------------------------------------------------------
OPT_VBOX='no' # install answering machine: yes or no
VBOX_COMPRESSION='adpcm-4' # voice compr. level: adpcm-2/3/4 = 2/3/4 kb/s
VBOX_FREESPACE='0' # if space < freespace a call isn't accepted
VBOX_DEBUGLEVEL='FEWIDJ' # FEWIDJ means "log everything", -> see docs
VBOX_VBOXD_ALLOW_1='*' # optional: vboxd requests are allowed from...
VBOX_VBOXD_ALLOW_2='' # "*" means every host
VBOX_VBOXD_ALLOW_3=''
VBOX_VBOXD_ALLOW_4=''
VBOX_USERS_N='1' # number of users
VBOX_COMMON_SPACE='yes' # common spoolspace for all users?: yes or no
VBOX_BEEP_USERS='vboxuser' # users to be "beeped": blank separated list
VBOX_BEEP_HOURS='*' # when to use the beep signal: timerange
VBOX_BEEP_PAUSE='10' # pause between beeps in seconds
# user specific configuration:
VBOX_USERNAME_1='vboxuser' # username
VBOX_PASSWD_1='vbox' # password
VBOX_MSN_1='555111' # ph. number to be monitored (without area code)
VBOX_SPACE_1='6000' # diskspace to be used for spooldir(s) in kb
# the following configuration simulates an old-fashioned analog answering
# mashine: every call is answered at any time, always after 4 rings,
# the standard message is played and a 60 second message will be recorded.
# (boring... ;-)
# Please read the documentation to create a more complex setup
VBOX_CALLERID_1_1 = '* - --- Unknown ---'
VBOX_CALLERID_1_2 = ''
VBOX_CALLERID_1_3 = ''
VBOX_CALLERID_1_4 = ''
VBOX_RINGS_1_1 = '* * 4'
VBOX_RINGS_1_2 = ''
VBOX_RINGS_1_3 = ''
VBOX_RINGS_1_4 = ''
VBOX_SSECTION_1_1 = '* * standard.msg 60'
VBOX_SSECTION_1_2 = ''
VBOX_SSECTION_1_3 = ''
VBOX_SSECTION_1_4 = ''
VBOX_SECNAME_1_1 = ''
VBOX_SECTION_1_1_1 = ''
VBOX_SECTION_1_1_2 = ''
VBOX_SECNAME_1_2 = ''
VBOX_SECTION_1_2_1 = ''
VBOX_SECTION_1_2_2 = ''
#------------------------------------------------------------------------------
# end of config.txt
#------------------------------------------------------------------------------
