Wacom Artpad II

Startseite

Nachricht beantworten
Autor: John Fleuret
Datum:  
To: Mailing-List GUILDE
Betreff: Wacom Artpad II
Bonjour,

Voila tout d'abord ma configuration
un AMD K6 200MMX sous Mandrake 6.0 et KDE 1.0-2
Mon but etant d'installer ma tablette graphique a la place de ma souris.

Dans un premier temps j'ai configuré mon fichier XF86Config en ajoutant le
chemin des modules, le chargement du module xf86Wacom.so et la section Xinput.
et en branchant ma tablette sut le com1 (dev/mouse est un alias vers dev/ttys0)
Ci joint mon fichier XF86Config

Ensuite j'ai modifier mon fichier xinitrc pour que ma tablette devienne le
pointeur principal (xsetpointer Wacom)
ci joint aussi mon fichier xinitrc.

Mais bien sur vous l'aurait compris tout cela ne fonctionne pas sinon ce
message n'aurait pas lieu d'exister. Pourriez me dire si j'ai oublier
quelquechose ou s'il y a des erreurs dans mes fichiers ?
Merci

--
John Fleuret
E-mail : john.fleuret@???
web : http://www.bigfoot.com/~aviron.grenoblois# File generated by XConfigurator.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

    RgbPath    "/usr/X11R6/lib/X11/rgb"


# Multiple FontPath entries are allowed (they are concatenated together)

    FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"

    
# Location of modules

ModulePath "/usr/X11R6/lib/modules/"

EndSection


Section "Module"
    Load "xf86Wacom.so"
EndSection


# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals


    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap


    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom


EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"


    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"


    AutoRepeat  500 5


    # Let the server do the NumLock processing.  This should only be 
    # required when using pre-R6 clients
    #ServerNumLock


    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #Xleds      1 2 3


    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
    #RightCtl key to Compose, and ScrollLock key to ModeLock:


   LeftAlt        Meta
   RightAlt        Meta
   ScrollLock      Compose
   RightCtl        Control


   XkbKeycodes     "xfree86"
   XkbTypes        "default"
   XkbCompat       "default"
   XkbSymbols      "fr(pc102)"
   XkbGeometry     "pc(pc102)"
   XkbRules        "xfree86"
   XkbModel        "pc102"
   XkbLayout       "fr"
EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "Microsoft"
    Device      "/dev/ttyS0"


# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol    "Xqueue"


# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate    9600
#    SampleRate    150


# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50


# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle


EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Panasonic"
    VendorName  "Help"
    ModelName   "TX-T1565-PE1"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30 - 67


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-120


# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace


#    Mode "1024x768i"
#        DotClock    45
#        HTimings    1024 1048 1208 1264
#        VTimings    768 776 784 817
#        Flags        "Interlace"
#    EndMode


# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
#Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace


# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync


# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync


# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
#Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace


# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054


# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064


# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064


# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300  301  602  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan


EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************
# Device configured by Xconfigurator:

Section "Device"
    Identifier  "S3VirgeDX"
    VendorName  "Help"
    BoardName   "Virge"
    VideoRam    4096
     #Option "xaa_benchmark"
     #Option "fifo_moderate"
     #Option "pci_burst_on"
     #Option "pci_retry"
    # Insert Clocks lines here if appropriate
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    Device      "S3VirgeDX"
    Monitor     "Panasonic"
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
EndSection


# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
    Driver      "accel"
    Device      "S3VirgeDX"
    Monitor     "Panasonic"
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
EndSection



# **********************************************************************
# Input sections
# **********************************************************************

Section "Xinput"
    SubSection "WacomStylus"
       Port "/dev/mouse"
       DeviceName "Wacom"
       Suppress 9
       Mode Absolute
   EndSubSection
   SubSection "WacomCursor"
       Port "/dev/mouse"
   EndSubSection
EndSection