cd writing with yamaha 4001T CD RW

トップ ページ

このメッセージに返信
著者: Régis Larrodé
日付:  
To: guilde
題目: cd writing with yamaha 4001T CD RW
Bonjour a tous,

apres qq mois d'interruption sur la liste, me revoilou.
J'ai deux problemes :

1/ J'ai un petit probleme avec le graveur qu'on m'a prete, pouvez vous
me dire de quoi ca vient, le detail de mon pb se trouve ci-dessous (en
anglais car je pensais le poster sur un newsgroup...)

2/ Qq'un connait il la carte ISDN Diamond Netcommander, j'ai charge le
module isdn et installe kisdn avec kde (donc aussi les isdn4utils) mais
quand je lance la connection avec le frontend kisdn, il semble que la
carte ne dialogue pas, cette carte n'est pas listee dans la doc isdn
avec hisax mais est plug and play et est bien reconnue au boot avec
isapnp tools, sous windows elle emule un modem donc ca doit pouvoir
marcher non ? une idee ?



Pb question 1/ :

Good morning,

today i tried to burn a cdr on my yamaha cd rw 4001T

after configuring the kernel as described in the cd-writing how to.

My cd rw is an ATAPI IDE so i put the line in my conf.modules:

options ide-cd ignore=hdb

After creating an iso image file of the original cd on /mnt/jeux/CD_1.iso

i tried a cdrecord -scanbus, the cd rw seems to be ok :

[root@viking cdrom]# cdrecord -scanbus
Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
        0,0,0     0) 'YAMAHA  ' 'CRW4001         ' '1.0h' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *


then i launch :

[root@viking cdrom]# cdrecord -v speed=4 dev=0,0,0 -data /mnt/jeux/CD_1.iso -dummy
cdrecord: Badly placed option. Global options must be before any track.
[root@viking cdrom]# cdrecord -v -dummy speed=4 dev=0,0,0 -data /mnt/jeux/CD_1.iso
Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW4001         '
Revision       : '1.0h'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1176000 = 1148 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  427 MB
Total size:     491 MB (48:40.06) = 219005 sectors
Lout start:     491 MB (48:42/05) = 219005 sectors
Current Secsize: -1
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  ATIP start of lead in:  -11175 (97:33/00)
  ATIP start of lead out: 335100 (74:30/00)
Disk type unknown
Manuf. index: 82
Manufacturer: ILLEGAL: Old CDA Datenträger Albrechts GmbH.
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 1 seconds.
Waiting for reader process to fill input-buffer ... input-buffer ready.
cdrecord: Erreur d'entrée/sortie. read track info: scsi sendcmd: retryable error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 240s
Writing  time:    0.121s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.270s
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


There is no driver for this cd writer ? or the problem is something else ?


-------------------------------
Régis Larrodé
8 Impasse des Capucines
73100 TRESSERVE
Tél: 04 79 35 51 28
Fax: 04 79 35 46 18
Email: regis.larrode@???
-------------------------------