Problème installation Serveur X

トップ ページ

このメッセージに返信
著者: Alexandre Cailliau
日付:  
To: Guilde
題目: Problème installation Serveur X
Bonjour,
Voilà deux jours que j'essai d'installer une Mandrake 6.0. Tout s'est
pour l'instant bien passé mais je n'arrive pas à configurer mon serveur
X.
J'ai helas le désavantage d'avoir une carte graphique Intel i740. Lors
d'une précédent installation d'une RH5.2 j'avais bien galèré mais j'y
étais arrivé.
Voilà ce que j'ai fait :
    - installation du serveur XFree86-VGA16
    - installation de XF86Setup
    - installation de XFree86-SVGA
    - Configuration des fréquence de l'écran à l'aide de XF86Setup
    - installation de XBF_i740
    - suppression du fichier etc/X11/X
    - création de ce fichier à l'aide de la commande suivante "ln -sf
/usr/X11R6/XBF_i740 /etc/X11/X
Ensuit le lance "startx " et j'obtiens les erreurs copiées dans le
fichier erreur joint.
Quelqu'un pourrait il m'expliquer ce que j'ai fait ou pas fait qui pose
problème.


Ensuite voici trois questions :
    Quel est l'utilité et le rôle du fichier XBF_i740 par rapport au
serveur XFree86 ?
    A quoi sert le fichier X et que fait la commande ln ?
    Pourquoi la carte i740 n'est pas supporté directement par XFree86 et
cela va t il venir ?


Si vous avait des infos et quelques explications générales sur le
fonctionnement du serveur X, je suis preneur.

Voilà j'attend toutes les informations qui peuvent m'aider et je peux
fournir toutes les infos qui peuvent vous aider à résoudre mon problème.

Merci d'avance.
--
*************************************
*       Alexandre CAILLIAU          *
*                                   *
*   alexandre.cailliau@???  *
*************************************


(--) SVGA: PCI: Intel i740 (AGP) rev 33, Memory @ 0xe6000000,
0xe5000000
(--) SVGA: chipset: i740
(--) SVGA: videoram: 8192k
(**) SVGA: clocks: 25.18
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 8 bits per col(--) SVGA: PCI: Intel i740 (AGP) rev
33, M
Fatal server error:
No valid modes found.

When reporting a problem related to a server crash, please send
the full server output, not just the last messages


_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Con



# XF86Config auto-generated by XF86Setup
#
# Copyright (c) 1996 by The XFree86 Project, Inc.

#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# See 'man XF86Config' for info on the format of this file

Section "Files"
   RgbPath    "/usr/X11R6/lib/X11/rgb"
   FontPath   "/usr/X11R6/lib/X11/fonts/local"
   FontPath   "/usr/X11R6/lib/X11/fonts/misc:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
   FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
   FontPath   "/usr/X11R6/lib/X11/fonts/TrueType"
   FontPath   "/usr/X11R6/lib/X11/fonts/misc"
   FontPath   "/usr/X11R6/lib/X11/fonts/75dpi"
   FontPath   "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection


Section "ServerFlags"
EndSection

Section "Keyboard"
   Protocol        "Standard"
   XkbRules        "xfree86"
   XkbModel        "pc101"
   XkbLayout       "us"
EndSection


Section "Pointer"
   Protocol        "PS/2"
   Device          "/dev/mouse"
EndSection


Section "Monitor"
   Identifier      "Primary Monitor"
   VendorName      "Unknown"
   ModelName       "Unknown"
   HorizSync       31.5-48.5
   VertRefresh     55-90
   Modeline  "320x204"    25.18 320 344 376 400 204 206 225 0
EndSection


Section "Device"
   Identifier      "Primary Card"
   VendorName      "Unknown"
   BoardName       "Unknown"
   Clocks          25.18
EndSection


Section "Screen"
   Driver          "Accel"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   DefaultColorDepth 8
   SubSection "Display"
      Depth        8
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        15
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        16
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        24
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        32
      Modes        "320x204"
   EndSubSection
EndSection


Section "Screen"
   Driver          "SVGA"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   DefaultColorDepth 8
   SubSection "Display"
      Depth        8
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        15
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        16
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        24
      Modes        "320x204"
   EndSubSection
   SubSection "Display"
      Depth        32
      Modes        "320x204"
   EndSubSection
EndSection


Section "Screen"
   Driver          "VGA16"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   SubSection "Display"
      Depth        4
      Modes        "320x204"
   EndSubSection
EndSection


Section "Screen"
   Driver          "VGA2"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   SubSection "Display"
      Depth        1
      Modes        "320x204"
   EndSubSection
EndSection


Section "Screen"
   Driver          "Mono"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   SubSection "Display"
      Depth        1
      Modes        "320x204"
   EndSubSection
EndSection

# File generated by XConfigurator.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

    RgbPath    "/usr/X11R6/lib/X11/rgb"


# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"


EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals


    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap


    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom


EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"


    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"


    AutoRepeat  500 5


    # Let the server do the NumLock processing.  This should only be 
    # required when using pre-R6 clients
    #ServerNumLock


    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #Xleds      1 2 3


    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
    #RightCtl key to Compose, and ScrollLock key to ModeLock:


    LeftAlt        Meta
    RightAlt        Meta
   ScrollLock      Compose
   RightCtl        Control


# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    XkbDisable


# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"


# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""


   XkbKeycodes     "xfree86"
   XkbTypes        "default"
   XkbCompat       "default"
   XkbSymbols      "us(pc101)"
   XkbGeometry     "pc"
   XkbRules        "xfree86"
   XkbModel        "pc101"
    XkbLayout       "fr"
EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/mouse"


# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol    "Xqueue"


# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate    9600
#    SampleRate    150


# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50


# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle


EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"
    VendorName  "Unknown"
    ModelName   "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 48.5


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-100


# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace


#    Mode "1024x768i"
#        DotClock    45
#        HTimings    1024 1048 1208 1264
#        VTimings    768 776 784 817
#        Flags        "Interlace"
#    EndMode


# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace


# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync


# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace


# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync


# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync


# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace


# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054


# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908


# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064


# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064


# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync


# 1800x1440 @ 64Hz, 96.15 kHz hsync 
ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync 
ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync


# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -VSync


# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan


EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier        "Generic VGA"
    VendorName        "Unknown"
    BoardName "Unknown"
    Chipset   "generic"


#    VideoRam 256


#    Clocks   25.2 28.3


EndSection

# Device configured by Xconfigurator:

Section "Device"
    Identifier  "My Video Card"
    VendorName  "Unknown"
    BoardName   "Unknown"
    #VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device      "Generic VGA"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection


# The 16-color VGA server

Section "Screen"
    Driver      "vga16"
    Device      "Generic VGA"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection


# The Mono server

Section "Screen"
    Driver      "vga2"
    Device      "Generic VGA"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection


# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
    Driver      "accel"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection