Bonjour,
J'ai sur la base d'une mandrake 5.3, recompilé un noyau SMP, avec ppa en
module pour connecter un lecteur zip parallèle sur ma machine ou tout
est en SCSI.
Ci-joint le fichier de configuration de compilation du noyau:
configsmpzipbis.2.0.36
Lors de l'exécution de la commande insmod ppa tout commence bien
apparemment, mais j'ai une erreur de page noyau !
Voir dmesg.out pour la trace au boot de la machine et des messages lors
du insmod
Merci d'avance pour vos conseils pour m'aider à résoudre ce probléme.
Dominique.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: Probing port 0278
ppa: SPP port present
ppa: ECP with a 16 byte FIFO present
ppa: PS/2 bidirectional port present
ppa: Failed Intel bug check. (Phony EPP in ECP)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
scsi1 : Iomega parport ZIP drive
scsi : 2 hosts.
Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Type: Direct-Access ANSI SCSI revision: 02
Unable to handle kernel paging request at virtual address c88213f4
current->tss.cr3 = 04a50000, %cr3 = 04a50000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<001c9b64>]
EFLAGS: 00010202
eax: 00000001 ebx: 04ab1f18 ecx: 088213dc edx: 0000ea60
esi: 088213dc edi: 20303031 ebp: 04a63df4 esp: 04a63d20
ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
Process insmod (pid: 3469, process nr: 52, stackpage=04a63000)
Stack: 00000006 00000000 04a63df0 00000001 04c4b018 00000001 00000293
00000000
088213dc 00224468 04a63d84 002cf000 00099498 00000293 0012701f
00000246
0000004c 00000000 00000000 00000000 04a63d6c 00000000 00000000
00000000
Call Trace: [<088213dc>] [<0012701f>] [<001c00ff>] [<001c9591>]
[<0881e20c>] [<0
01b3145>] [<001b32d5>]
[<001b34e9>] [<0011a901>] [<0881e20c>] [<001cc8af>] [<0881e20c>]
[<001cce
46>] [<0881e20c>] [<0881c01a>]
[<0881e20c>] [<0011cdf0>] [<00122118>] [<0881c004>] [<0881c040>]
[<001171
18>] [<0010b506>]
Code: 8b 56 18 85 d2 74 09 53 ff d2 01 43 0c 83 c4 04 8b 7c 24 20
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
J'arrive ensuite dans l'état:
[root@serveur /]# lsmod
Module Pages Used by
ppa 3
(uninitialized)
Je ne peux plus enlever le module (sauf en rebootant la machine):
[root@serveur /]# rmmod ppa
rmmod: ppa: Device or resource busy
--
,,,
(o o)
+-------------------oOO--(_)--OOo--------------------------------------+
| Dominique LABBE-LAVIGNE Quality Assurance Manager |
| Akazi Technologies S.A. mailto:Dominique.Labbe-Lavigne@akazi.com |
| 21, chemin des Prés Phone : +33 (0)4 76 04 15 91 |
| 38240 Meylan, France Fax : +33 (0)4 76 04 15 92 |
+----------------------------------------------------------------------+Memory: sized by int13 0e801h
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: ALTAIR APIC at: 0xFEE00000
Processor #0 Pentium(tm) APIC version 16
Processor #1 Pentium(tm) APIC version 16
I/O APIC #14 Version 17 at 0xFEC00000.
Processors: 2
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fcc60
pcibios_init : BIOS32 Service Directory entry at 0xfcc70
pcibios_init : PCI BIOS revision 2.10 entry at 0xfcc91
Probing PCI hardware.
PCI bridge optimization.
Cache L2: Not supported.
CPU-PCI posted write: on.
CPU-Memory posted write: on.
PCI-Memory posted write: on.
PCI burst: on.
Calibrating delay loop.. ok - 35.94 BogoMIPS
Memory: 127348k/131072k available (1028k kernel code, 384k reserved, 2312k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP, IPIP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
/proc/mtrr: MTRR's are NOT supported
Linux version 2.0.36 (root@serveur) (gcc version 2.7.2.3) #1 Thu May 6 11:31:08 CEST 1999
Booting processor 1 stack 00002000: Calibrating delay loop.. ok - 36.04 BogoMIPS
Total of 2 processors activated (71.99 BogoMIPS).
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty02 at 0x03e8 (irq = 4) is a 16550A
tty03 at 0x02e8 (irq = 3) is a 16550A
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.09
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide2: ports already in use, skipping probe
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 82078.
(scsi0) <Adaptec AIC-7870 SCSI host adapter> found at PCI 11/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 412 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.7/3.2.4
<Adaptec AIC-7870 SCSI host adapter>
scsi : 1 host.
Vendor: IBM OEM Model: 0664M1H Rev: 7 72
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IBMRISC Model: 0664M1H Rev: 5 5A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: IBMRISC Model: 0664M1H Rev: 5 5A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
Vendor: IBM Model: 0664M1H !P Rev: 6 61
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi0, channel 0, id 4, lun 0
Vendor: TANDBERG Model: TDC 4200 Rev: =07:
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-5301TA Rev: 1895
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI tape 1 SCSI cdrom 4 SCSI disks total.
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
tunnel: version v0.2b2
tulip.c:v0.89H 5/23/98 becker@???
eth0: Digital DS21140 Tulip at 0xf880, 00 00 c0 23 3f c6, IRQ 9.
eth0: Old format EEPROM on 'SMC9332DST' board. Using substitute media control info.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth0: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
Partition check:
sda: sda1 sda2 < sda5 >
sdb: sdb1
sdc: sdc1
sdd:Uhhuh. NMI received. Dazed and confused, but trying to continue
You probably have a hardware problem with your RAM chips or a
power saving mode enabled.
sdd1
JAVA Binary support v1.01 for Linux 1.3.98 (C)1996 Brian A. Lantz
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 128484k swap-space (priority -1)
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
Unable to get major 9 for SCSI tapes
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
Debut trace suite commande insmod ppa:
======================================
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: Probing port 0278
ppa: SPP port present
ppa: ECP with a 16 byte FIFO present
ppa: PS/2 bidirectional port present
ppa: Failed Intel bug check. (Phony EPP in ECP)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
scsi1 : Iomega parport ZIP drive
scsi : 2 hosts.
Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Type: Direct-Access ANSI SCSI revision: 02
Unable to handle kernel paging request at virtual address c88213f4
current->tss.cr3 = 04a50000, %cr3 = 04a50000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<001c9b64>]
EFLAGS: 00010202
eax: 00000001 ebx: 04ab1f18 ecx: 088213dc edx: 0000ea60
esi: 088213dc edi: 20303031 ebp: 04a63df4 esp: 04a63d20
ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
Process insmod (pid: 3469, process nr: 52, stackpage=04a63000)
Stack: 00000006 00000000 04a63df0 00000001 04c4b018 00000001 00000293 00000000
088213dc 00224468 04a63d84 002cf000 00099498 00000293 0012701f 00000246
0000004c 00000000 00000000 00000000 04a63d6c 00000000 00000000 00000000
Call Trace: [<088213dc>] [<0012701f>] [<001c00ff>] [<001c9591>] [<0881e20c>] [<001b3145>] [<001b32d5>]
[<001b34e9>] [<0011a901>] [<0881e20c>] [<001cc8af>] [<0881e20c>] [<001cce46>] [<0881e20c>] [<0881c01a>]
[<0881e20c>] [<0011cdf0>] [<00122118>] [<0881c004>] [<0881c040>] [<00117118>] [<0010b506>]
Code: 8b 56 18 85 d2 74 09 53 ff d2 01 43 0c 83 c4 04 8b 7c 24 20
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=y
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M686 is not set
CONFIG_MTRR=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
CONFIG_IDE_CHIPSETS=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_PROMISE is not set
# CONFIG_BLK_DEV_QD6580 is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
CONFIG_IP_MASQUERADE=y
# CONFIG_IP_MASQUERADE_IPAUTOFW is not set
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_TRANSPARENT_PROXY=y
# CONFIG_IP_ALWAYS_DEFRAG is not set
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_ALIAS=y
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=y
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=m
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_OVERRIDE_CMDS is not set
# CONFIG_AIC7XXX_PROC_STATS is not set
CONFIG_AIC7XXX_RESET_DELAY=15
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_PPA_HAVE_PEDANTIC is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_VORTEX is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_EEXPRESS_PRO100B is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=y
# CONFIG_DGRS is not set
CONFIG_NE2K_PCI=y
# CONFIG_YELLOWFIN is not set
# CONFIG_RTL8139 is not set
# CONFIG_EPIC is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_ZNET is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
# CONFIG_SHAPER is not set
# CONFIG_RCPCI is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELES3C=y
CONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_IX1MICROR2=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_ASUSCOM=y
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_SEDLBAUER is not set
CONFIG_HISAX_SPORTSTER=y
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NICCY is not set
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_AVMB1=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_CDI_INIT=y
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m
#
# Filesystems
#
CONFIG_QUOTA=y
# CONFIG_MINIX_FS is not set
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_NLS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_KOI8_R=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_RNFS_BOOTP=y
CONFIG_RNFS_RARP=y
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
CONFIG_NCP_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_ISI is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
CONFIG_ATIXL_BUSMOUSE=y
CONFIG_BUSMOUSE=y
CONFIG_MS_BUSMOUSE=y
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=y
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y
#
# Sound
#
CONFIG_SOUND=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_GUS=m
CONFIG_GUS16=y
CONFIG_GUSMAX=y
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m
#
# Additional low level sound drivers
#
CONFIG_LOWLEVEL_SOUND=y
CONFIG_ACI_MIXER=m
CONFIG_AWE32_SYNTH=m
CONFIG_AEDSP16=m
CONFIG_AEDSP16_BASE=220
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_BASE=220
CONFIG_AEDSP16_SB_IRQ=7
CONFIG_AEDSP16_SB_DMA=1
# CONFIG_AEDSP16_MPU401 is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
