Problème d'installation du module ppa (lecteur zip)

Startseite

Nachricht beantworten
Autor: Dominique Labbe-Lavigne
Datum:  
To: Groupement des Utilisateurs Linux du Dauphiné
Betreff: Problème d'installation du module ppa (lecteur zip)
Bonjour,

J'ai sur la base d'une mandrake 5.3, recompilé un noyau SMP, avec ppa en
module pour connecter un lecteur zip parallèle sur ma machine ou tout
est en SCSI.
Ci-joint le fichier de configuration de compilation du noyau:
configsmpzipbis.2.0.36

Lors de l'exécution de la commande insmod ppa tout commence bien
apparemment, mais j'ai une erreur de page noyau !
Voir dmesg.out pour la trace au boot de la machine et des messages lors
du insmod

Merci d'avance pour vos conseils pour m'aider à résoudre ce probléme.
Dominique.

ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: Probing port 0278
ppa:     SPP port present
ppa:     ECP with a 16 byte FIFO present
ppa:     PS/2 bidirectional port present
ppa:     Failed Intel bug check. (Phony EPP in ECP)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
scsi1 : Iomega parport ZIP drive
scsi : 2 hosts.
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Unable to handle kernel paging request at virtual address c88213f4
current->tss.cr3 = 04a50000, %cr3 = 04a50000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<001c9b64>]
EFLAGS: 00010202
eax: 00000001   ebx: 04ab1f18   ecx: 088213dc   edx: 0000ea60
esi: 088213dc   edi: 20303031   ebp: 04a63df4   esp: 04a63d20
ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
Process insmod (pid: 3469, process nr: 52, stackpage=04a63000)
Stack: 00000006 00000000 04a63df0 00000001 04c4b018 00000001 00000293
00000000
       088213dc 00224468 04a63d84 002cf000 00099498 00000293 0012701f
00000246
       0000004c 00000000 00000000 00000000 04a63d6c 00000000 00000000
00000000
Call Trace: [<088213dc>] [<0012701f>] [<001c00ff>] [<001c9591>]
[<0881e20c>] [<0
01b3145>] [<001b32d5>]
       [<001b34e9>] [<0011a901>] [<0881e20c>] [<001cc8af>] [<0881e20c>]
[<001cce
46>] [<0881e20c>] [<0881c01a>]
       [<0881e20c>] [<0011cdf0>] [<00122118>] [<0881c004>] [<0881c040>]
[<001171
18>] [<0010b506>]
Code: 8b 56 18 85 d2 74 09 53 ff d2 01 43 0c 83 c4 04 8b 7c 24 20
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035



J'arrive ensuite dans l'état:
[root@serveur /]# lsmod
Module         Pages    Used by
ppa                3 
(uninitialized)                                       


Je ne peux plus enlever le module (sauf en rebootant la machine):
[root@serveur /]# rmmod ppa
rmmod: ppa: Device or resource busy      



-- 
                         ,,,
                        (o o)
+-------------------oOO--(_)--OOo--------------------------------------+

| Dominique LABBE-LAVIGNE     Quality Assurance Manager                |
| Akazi Technologies S.A.     mailto:Dominique.Labbe-Lavigne@akazi.com |
| 21, chemin des Prés         Phone : +33 (0)4 76 04 15 91             |
| 38240 Meylan, France        Fax   : +33 (0)4 76 04 15 92             |

+----------------------------------------------------------------------+Memory: sized by int13 0e801h
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: ALTAIR       APIC at: 0xFEE00000
Processor #0 Pentium(tm) APIC version 16
Processor #1 Pentium(tm) APIC version 16
I/O APIC #14 Version 17 at 0xFEC00000.
Processors: 2
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fcc60
pcibios_init : BIOS32 Service Directory entry at 0xfcc70
pcibios_init : PCI BIOS revision 2.10 entry at 0xfcc91
Probing PCI hardware.
PCI bridge optimization.
    Cache L2: Not supported.
    CPU-PCI posted write: on.
    CPU-Memory posted write: on.
    PCI-Memory posted write: on.
    PCI burst: on.
Calibrating delay loop.. ok - 35.94 BogoMIPS
Memory: 127348k/131072k available (1028k kernel code, 384k reserved, 2312k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP, IPIP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ...  ... done
/proc/mtrr: MTRR's are NOT supported
Linux version 2.0.36 (root@serveur) (gcc version 2.7.2.3) #1 Thu May 6 11:31:08 CEST 1999
Booting processor 1 stack 00002000: Calibrating delay loop.. ok - 36.04 BogoMIPS
Total of 2 processors activated (71.99 BogoMIPS).
Starting kswapd v 1.4.2.2 
Serial driver version 4.13 with no serial options enabled
tty02 at 0x03e8 (irq = 4) is a 16550A
tty03 at 0x02e8 (irq = 3) is a 16550A
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.09
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide2: ports already in use, skipping probe
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 82078.
(scsi0) <Adaptec AIC-7870 SCSI host adapter> found at PCI 11/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 412 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.7/3.2.4
       <Adaptec AIC-7870 SCSI host adapter>
scsi : 1 host.
  Vendor: IBM OEM   Model: 0664M1H           Rev: 7 72
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: IBMRISC   Model: 0664M1H           Rev: 5 5A
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
  Vendor: IBMRISC   Model: 0664M1H           Rev: 5 5A
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
  Vendor: IBM       Model: 0664M1H       !P  Rev: 6 61
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdd at scsi0, channel 0, id 4, lun 0
  Vendor: TANDBERG  Model:  TDC 4200         Rev: =07:
  Type:   Sequential-Access                  ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
  Vendor: TOSHIBA   Model: CD-ROM XM-5301TA  Rev: 1895
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI tape 1 SCSI cdrom 4 SCSI disks total.
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9 GB]
tunnel: version v0.2b2
tulip.c:v0.89H 5/23/98 becker@???
eth0: Digital DS21140 Tulip at 0xf880, 00 00 c0 23 3f c6, IRQ 9.
eth0: Old format EEPROM on 'SMC9332DST' board.  Using substitute media control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth0:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
Partition check:
 sda: sda1 sda2 < sda5 >
 sdb: sdb1
 sdc: sdc1
 sdd:Uhhuh. NMI received. Dazed and confused, but trying to continue
You probably have a hardware problem with your RAM chips or a
power saving mode enabled.
 sdd1
JAVA Binary support v1.01 for Linux 1.3.98 (C)1996 Brian A. Lantz
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 128484k swap-space (priority -1)
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
Unable to get major 9 for SCSI tapes
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035


Debut trace suite commande insmod ppa:
======================================
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: Probing port 0278
ppa:     SPP port present
ppa:     ECP with a 16 byte FIFO present
ppa:     PS/2 bidirectional port present
ppa:     Failed Intel bug check. (Phony EPP in ECP)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
scsi1 : Iomega parport ZIP drive
scsi : 2 hosts.
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Unable to handle kernel paging request at virtual address c88213f4
current->tss.cr3 = 04a50000, %cr3 = 04a50000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<001c9b64>]
EFLAGS: 00010202
eax: 00000001   ebx: 04ab1f18   ecx: 088213dc   edx: 0000ea60
esi: 088213dc   edi: 20303031   ebp: 04a63df4   esp: 04a63d20
ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
Process insmod (pid: 3469, process nr: 52, stackpage=04a63000)
Stack: 00000006 00000000 04a63df0 00000001 04c4b018 00000001 00000293 00000000 
       088213dc 00224468 04a63d84 002cf000 00099498 00000293 0012701f 00000246 
       0000004c 00000000 00000000 00000000 04a63d6c 00000000 00000000 00000000 
Call Trace: [<088213dc>] [<0012701f>] [<001c00ff>] [<001c9591>] [<0881e20c>] [<001b3145>] [<001b32d5>] 
       [<001b34e9>] [<0011a901>] [<0881e20c>] [<001cc8af>] [<0881e20c>] [<001cce46>] [<0881e20c>] [<0881c01a>] 
       [<0881e20c>] [<0011cdf0>] [<00122118>] [<0881c004>] [<0881c040>] [<00117118>] [<0010b506>] 
Code: 8b 56 18 85 d2 74 09 53 ff d2 01 43 0c 83 c4 04 8b 7c 24 20 
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035

#
# Automatically generated by make menuconfig: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y

#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=y
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M686 is not set
CONFIG_MTRR=y

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
CONFIG_IDE_CHIPSETS=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_PROMISE is not set
# CONFIG_BLK_DEV_QD6580 is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
CONFIG_IP_MASQUERADE=y
# CONFIG_IP_MASQUERADE_IPAUTOFW is not set
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_TRANSPARENT_PROXY=y
# CONFIG_IP_ALWAYS_DEFRAG is not set
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_ALIAS=y
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=y
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=m
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_OVERRIDE_CMDS is not set
# CONFIG_AIC7XXX_PROC_STATS is not set
CONFIG_AIC7XXX_RESET_DELAY=15
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_PPA_HAVE_PEDANTIC is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_VORTEX is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_EEXPRESS_PRO100B is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=y
# CONFIG_DGRS is not set
CONFIG_NE2K_PCI=y
# CONFIG_YELLOWFIN is not set
# CONFIG_RTL8139 is not set
# CONFIG_EPIC is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_ZNET is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
# CONFIG_SHAPER is not set
# CONFIG_RCPCI is not set

#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELES3C=y
CONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_IX1MICROR2=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_ASUSCOM=y
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_SEDLBAUER is not set
CONFIG_HISAX_SPORTSTER=y
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NICCY is not set
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_AVMB1=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_CDI_INIT=y
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m

#
# Filesystems
#
CONFIG_QUOTA=y
# CONFIG_MINIX_FS is not set
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_NLS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_KOI8_R=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_RNFS_BOOTP=y
CONFIG_RNFS_RARP=y
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
CONFIG_NCP_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set

#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_ISI is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
CONFIG_ATIXL_BUSMOUSE=y
CONFIG_BUSMOUSE=y
CONFIG_MS_BUSMOUSE=y
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=y
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y

#
# Sound
#
CONFIG_SOUND=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_GUS=m
CONFIG_GUS16=y
CONFIG_GUSMAX=y
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m

#
# Additional low level sound drivers
#
CONFIG_LOWLEVEL_SOUND=y
CONFIG_ACI_MIXER=m
CONFIG_AWE32_SYNTH=m
CONFIG_AEDSP16=m
CONFIG_AEDSP16_BASE=220
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_BASE=220
CONFIG_AEDSP16_SB_IRQ=7
CONFIG_AEDSP16_SB_DMA=1
# CONFIG_AEDSP16_MPU401 is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set